• ROUSH 422086 Cold Air Intake for 2018-2019 Mustang GT 5.0L

    NOT APPROVED FOR SALE IN CALIFORNIA OR STATES THAT REQUIRE CALIFORNIA E.O.# The all-new 2018-2019 Mustang 5.0L ROUSH V8 Cold Air Kit is more efficient air intake than the standard stock airbox. Cold air induction allows for latent potential in power and fuel efficiency that would otherwise be restricted, as well as providing reduced pressure drop. A custom tune is not required as this CAI system was engineered and tested specifically for this application, ensuring MAF signal performance matches factory settings. Included is an innovative airbox lid with see-through lens. Our dry filter is prov... [Read More]

    • ASIN: B07B1L2KLL
    • ASIN: B07B1L2KLL
    • Brand: Yates Performance
    • Manufacturer: Roush Performance Products

  • Airaid 450-326 MXP Red Cold Air Intake System with Oiled Filter

    The AIRAID MXP Series represents the ultimate in Cold Air Induction systems. Designed for high-performance gas and diesel applications, the MXP Intakes start with a new one piece roto-molded air box that addresses all the shortcomings of the restrictive factory design. Then AIRAID adds a new air intake tube constructed of cross-linked, high-density Polyethylene that is designed using extensive computer modeling to maintain proper mass air flow readings and calibration. They also frequently have a built-in velocity stack, which further promotes airflow. What this all means is a simple-to-instal... [Read More]

    • ASIN: B00PKPF22G
    • UPC: 642046453268
    • ASIN: B00PKPF22G
    • Brand: Airaid
    • Manufacturer: Airaid

  • ROUSH 422087 Cold Air Intake 2018-2019 Mustang 2.3L EcoBoost

    Not eligible to ship to California, or other states that requir an EO#. The ROUSH EcoBoost Cold Air Intake replaces the restrictive stock air intake, unlocking latent power and fuel efficiency. There's no need for calibration or a custom tune, as this CAI system was engineered, tested, and designed to work with the completely stock 2.3L I-4 engine! Paired with Ford's innovative EcoBoost engine, our ROUSH Cold Air Kit feeds cooler, denser air to the turbo, increasing overall power output, while also turning up the sound of your Mustang! Our kit provides more flow than the stock system at peak h... [Read More]

    • ASIN: B079Y7X4VP
    • ASIN: B079Y7X4VP
    • Brand: Yates Performance
    • Manufacturer: Roush Performance Products

  • BBK 18-19 MUSTANG GT 5.0 COLD AIR INTAKE KIT BLACKOUT

    Increase Horsepower & Torque in Minutes Increase your 2018-19 Mustang GT's performance with this BBK Performance Blackout cold air intake. One of today's favorite performance bolt-ons, BBK cold air intake kits are chrome plated to deliver great looks as well as real world horsepower gains. BBK cold air intake systems utilize a high flow washable conical cotton element filter. The 2018-19 Mustang GT has proven to be an amazing performer right off the showroom floor but, like all Mustangs, delivers even better results when you improve airflow to the engine. Works with Factory Tune BBK cold air i... [Read More]

    • ASIN: B07TK1SDRF
    • UPC: 797975145255
    • ASIN: B07TK1SDRF
    • Brand: BBK
    • Manufacturer: BBK

  • K&N Universal Clamp-On Engine Air Filter: Washable and Reusable: Round Tapered; 6 in (152 mm) Flange ID; 6.5 in (165 mm) Height; 7.5 in (191 mm) Base; 5 in (127 mm) Top , RF-1042

    K&N's Universal Air Filters are designed and manufactured for a wide variety of applications including racing vehicles, radio-controlled cars, generators, snowmobiles, tractors, and other applications. Regardless of the angle or offset diameter of the air intake, there is probably a K&N Universal air filter for your equipment. All filters are constructed with ultra-strong molded pliable rubber flanges which absorb vibration and allow for secure attachment and can also be stretched for up to 1/16" (1.5mm) to fit in-between sizes. K&N universal air filters are washable and reusable.

    • ASIN: B00062ZNY0
    • UPC: 024844076014
    • ASIN: B00062ZNY0
    • Brand: K&N
    • Manufacturer: K&N Engineering

  • aFe Power 51-12822 Magnum Force Ford Mustang EcoBoost Performance Intake System (Dry, 3-Layer Filter)

    8" Tall Air Filter: This intake system utilizes a pre-oiled, 8" tall conical 360 degree radial flow performance air filter with 3-layers of progressive finer porosity synthetic media providing  maximum airflow and performance. True Cold Air Design: This is a true cold air intake design for increased horsepower and torque with improved throttle response. The performance filter is located behind the front bumper cover to capture the coolest air available. Mandrel-Bent Tubing: Two-Piece 3" Mandrel-Bent Wrinkle-Black Powder-Coated aluminum intake tubes directs unrestricted airflow from the f... [Read More]

    • ASIN: B01E58FDJU
    • UPC: 802959514184
    • ASIN: B01E58FDJU
    • Brand: aFe Power
    • Manufacturer: AFE Filters

  • K&N 63-2605 P Performance Air Intake System

    The K&N 63-2605 AirCharger air intake system replaces the restrictive factory air filter and air intake housing on some Ford Mustang GT models. K&N air intakes are designed to dramatically reduce air intake restriction as well as smooth and straighten air flow. This allows your engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engine’s RPM range. The 63-2605 air intake comes with a chrome topped K&N high-flow air filter and a heat shield that installs into the original air box space. Air is directed ... [Read More]

    • ASIN: B07LD3YLYY
    • UPC: 024844370211
    • ASIN: B07LD3YLYY
    • Brand: K&N
    • Manufacturer: K&N

  • AIRAID 450-930 Modular Intake Tube

    Air is lazy and will always follow the path of least resistance. So, why not give it an easier path into your engine with AIRAID modular intake tubes! constructed of cross-linked, high-density polyethylene, the AIRAID MIT provides a smooth path to the throttle body that flows up to an additional 400 cfm over restrictive stock intake tubes. With the AIRAID MIT, additional horsepower, torque, and enhanced fuel efficiency can be had with just simple tools and a few minutes for installation. All of the required hardware is included along with easy-to-follow instructions.

    • ASIN: B00XJRLRNU
    • UPC: 642046459307
    • ASIN: B00XJRLRNU
    • Brand: Airaid
    • Manufacturer: Airaid

  • K&N 69-3540TP P Performance Air Intake System

    The K&N 69-3540TP Typhoon air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Ford Mustang GT models. The restrictive factory air filter and air intake housing are replaced by the K&N Typhoon air intake which is designed to dramatically reduce air flow restriction as it smoothes and straightens air flow. This allows your engine to inhale a larger amount of air than the factory air intake. More air means more usable power and acceleration throughout the engine’s RPM range. In addition to more power, this air intake system improves engine s... [Read More]

    • ASIN: B07L4F13ZF
    • UPC: 024844370228
    • ASIN: B07L4F13ZF
    • Brand: K&N
    • Manufacturer: K&N

  • AEM 21-844C A Cold Air Intake System

    This Performance Air Intake System allows your engine to breath more air compared to the restrictive factory air intake housing. It is designed, tuned, and dyno-tested to produce more horsepower and torque. The cone-shaped AEM Dry flow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). A custom shaped heat shield with edge trim lining is included to keep engine bay heat from the air intake. The air intake tube is constructed from mandrel-bent aluminum featuring a durable gunmetal gray... [Read More]

    • ASIN: B07HBBP34L
    • UPC: 024844368584
    • ASIN: B07HBBP34L
    • Brand: AEM
    • Manufacturer: AEM

  • Airaid 450-638 Throttle Body Spacer

    The PowerAid was developed to enhance your vehicle's off-idle to mid-range performance and efficiency. The unique "Helix Bore" design of the PowerAid creates a spinning action of the incoming air. As air passes through your throttle body, this helical effect causes the air molecules to organize and maintain high velocity. The organization and high velocity of the air is extremely beneficial because it helps to provide a superior atomized mixture of fuel and air all the way into the combustion chamber. The benefits you will see are tremendous torque gains between 800 to 2500 RPM, and potential ... [Read More]

    • ASIN: B00AUFOC36
    • UPC: 642046456382
    • ASIN: B00AUFOC36
    • Brand: Airaid
    • Manufacturer: Airaid

  • aFe Power 54-12822 Magnum Force Ford Mustang EcoBoost Performance Intake System (Oiled, 5-Layer Filter)

    8" Tall Air Filter: This intake system utilizes a pre-oiled, 8" tall conical 360 degree radial flow performance air filter with 5-layers of progressive finer mesh cotton media providing  maximum airflow and performance. True Cold Air Design: This is a true cold air intake design for increased horsepower and torque with improved throttle response. The performance filter is located behind the front bumper cover to capture the coolest air available. Mandrel-Bent Tubing: Two-Piece 3" Mandrel-Bent Wrinkle-Black Powder-Coated aluminum intake tubes directs unrestricted airflow from the filter t... [Read More]

    • ASIN: B01E58FDT0
    • UPC: 802959505755
    • ASIN: B01E58FDT0
    • Brand: aFe Power
    • Manufacturer: aFe Power

  • AIRAID 451-356 Performance Air Intake System

    The AIRAID MXP Air Intake System represents the ultimate in AIRAID’s cold air induction systems and delivers higher levels of horsepower and acceleration gains for high-performance gas and diesel vehicles. Some AIRAID MXP Air Intakes start with a replacement one-piece roto-molded air box that addresses the shortcomings of the restrictive factory design. Housed inside the air box is an AIRAID premium air filter for outstanding air flow and filtration. Air is directed through a new air intake tube constructed of cross-linked, high-density polyethylene that is designed using extensive computer ... [Read More]

    • ASIN: B07M8JQQ4P
    • UPC: 642046074746
    • ASIN: B07M8JQQ4P
    • Brand: Airaid
    • Manufacturer: AIRAID

  • K&N engine air filter, washable and reusable: 2015-2019 Ford Mustang L4/V6/V8 33-5029

    K&N's replacement air filters are designed to increase horsepower and acceleration while providing excellent filtration. We make over 1,200 different replacement air filters for virtually every vehicle on the road. These filters are washable and reusable and are custom designed to fit into your existing factory air box. Their drop-in design means adding performance is simple. With most vehicles you simply remove the disposable air filter and replace it with a K&N. See applicable instruction sheet for details. Our stock replacement air filters for street vehicles are covered by our famous K&N M... [Read More]

    • ASIN: B00SLK78HY
    • UPC: 024844356352
    • ASIN: B00SLK78HY
    • Brand: K&N
    • Manufacturer: K&N

  • Mishimoto MMINT-MUS4-15KWBK Intercooler Kit (Ford Mustang EcoBoost Performance)

    Turbocharged 4-cylinder engines produce extremely hot charge air temperatures very quickly within a few laps on the track or aggressive street driving and stock tube-and-fin intercoolers also heat soak very easily. Mishimoto has developed a highly efficient bar-and plate intercooler engineered specifically for the Mustang EcoBoost to keep your air intake temperatures consistently low, run after run. This kit also includes both hot-side and cold-side intercooler pipes, allowing you to upgrade the entire EcoBoost intercooler system at one time! This EcoBoost intercooler is a direct-fit unit and ... [Read More]

    • ASIN: B016VASRLQ
    • UPC: 748354021523
    • ASIN: B016VASRLQ
    • Brand: Mishimoto
    • Manufacturer: Mishimoto

  • PERFORMANCE COLD AIR INTAKE KIT FOR COLD AIR INTAKE KIT FOR 2005-2009 FORD MUSTANG BASE MODEL 4.0L V6 ENGINE

    Fits: 2005-2009 Ford Mustang Base Model 4.0l V6 Engine. Washable and Reusable high-performance Dry-flow air filter. It's the ultimate performance Air intake Kit with higher explosive horsepower output. The air intake kit can help your

    • UPC: 393599193

  • Spec-D Tuning AFC-MST96V8RD-AY Ford Mustang GT 4.6L V8 Coupe 2Dr Cold Air Intake Fan Filter Red

    AFCMST96V8RDAY Ford Mustang GT 4.6L V8 Coupe 2Dr Cold Air Intake Fan Filter

    • UPC: 136333615
    • Rating: 2.0

  • Ktaxon 5.0L V8 Cold Air Intake Blue High Flow Filter Kit for Ford 94-95 Mustang GT GTS

    Introductions:Do you want to have a high grade intake pipe? The excellent Intake Pipe is worth your attention! The product we recommend to you today features high quality, soft and durable material and elegant appearance

    • UPC: 439255289
    • Color: Blue

  • For 2011 to 2014 Ford Mustang Black Coated Aluminum Air Intake System - V6 12 13

    A Cold Air Intake System relocates the filter outside of the engine compartment to deliver the coolest air inlet temperatures possible. Cooler air carries more oxygen, which translates into a more intense explosion in the

    • UPC: 135680152
    • Model: AIP-2-HS-FM11V6-BKBK
    • Color: White

  • K&N Performance Cold Air Intake Kit 57-1542 with Lifetime Filter for Dodge Magnum/Challenger/Charger, Chrysler 300 5.7L/6.1L V8

    K&N's easy to install air intake systems replace the restrictive factory air filter and air intake housing allowing for virtually unrestricted air flow. This power gaining air intake comes with K&N's famous million mile limited

    • UPC: 34774022
    • Model: 57-1542
    • Color: Multicolor
    • Rating: 5.0

  • For 11-14 Ford Mustang Silver Coated Aluminum Air Intake Pipe+Red Filter - V6 12 13

    A Cold Air Intake System relocates the filter outside of the engine compartment to deliver the coolest air inlet temperatures possible. Cooler air carries more oxygen, which translates into a more intense explosion in the

    • UPC: 179083281
    • Model: AIP-2-HS-FM11V6-SLSL
    • Color: Silver Piping, Red FilterRed

  • K&N Performance Cold Air Intake Kit 63-1564 with Lifetime Filter for Dodge Challenger/Charger, Chrysler 300 3.6L V6

    K&N's easy to install air intake systems replace the restrictive factory air filter and air intake housing allowing for virtually unrestricted air flow. This power gaining air intake comes with K&N's famous million mile limited

    • UPC: 34786595
    • Model: 63-1564
    • Color: Multicolor

  • Yosoo 76mm 3 Inch Universal Car Cold Air Intake Filter Aluminum Induction Hose Pipe Kit,Turbo Filter,Cold Air Intake Hose

    Description: This air intake hose is designed for horsepower increase, which can also protect your engine from harmful debris. It universally fit for any 76mm / 3inch air intake hose. Features: The air intake pipe

    • UPC: 547312889
    • Color: Red
    • Rating: 5.0

  • Spec-D Tuning AFC-MST94V8BL-AY Mustang GT GTS 2Dr Coupe Cold Air Intake Indution System+Blue Filter

    AFCMST94V8BLAY Mustang GT GTS 2Dr Coupe Cold Air Intake Indution SystemBlue

    • UPC: 113309106

  • RL Concepts Red COLD AIR INTAKE KIT + FILTER Ford 05-09 Mustang Base 4.0L 245Cu. In. V6 GAS SOHC

    T-306 Aluminum High Quality Finished Intake pipe as shown in the pictureHigh quality built Washable and Reusable Air Filter as shown in the pictureAll necessary mounting hardwares, vacuum hoses and reducers will be included like

    • UPC: 674917507
    • Color: Red

  • 2018 Mustang GT Roush Cold Air Intake Review & Dyno

    The 3 Best Mustang Cold Air Intakes For 2015 - 2018 Ford Mustang GT

    The 3 Best Mustang Cold Air Intakes for 2015 - 2017 Mustang Ecoboost