After months of research & development, Ashdown has designed a range of products that are equipped with more features, more power, new stylish designs and best of all, a dramatic reduction in size and weight. The Rootmaster range of bass amplifiers truly stands out from the crowd.The RM-MAG-410T speaker enclosure is equipped with four Ashdown 10" speakers, as well as a tweeter. It can handle a 450 Watt payload at 8 Ohms, helping to bring the bass to the front of the mix with ease. The Rootmaster Slim cabinetry utilizes an Acoustic Suspension design that maximizes transducer performance by miti... [Read More]
2x10 Bass Guitar Cabinet Model #: SA 210, Woofer: Two 10" each has a 50 ounce magnet with a 2" Kapton voice coil, 400 Watts RMS, 800 Watts Peak, Impedance: 8 Ohms, Frequency response: 40Hz 5000Hz, Sensitivity: 97db, 5/8" plywood front panel, Black carpet with black metal corners, Recessed Handle, Full Metal Grill, Terminal cup with two 1/4" inputs, Dual Ports (both in the middle), hxwxd: 18" x 25" x 14", Weight: 55 pounds per cabinet, Condition: New, One Year Warranty. The 2x10 Bass Guitar Speaker Cabinet gives you the full, tight tone that a bass cabinet should. With two 10"speakers you... [Read More]
- 400 watts program power handling - 800 watts peak - Two custom-designed 10" ceramic magnet woofers - 8 ohms impedance - 18mm ply cabinet with internal bracing and steel corners - 16-gauge perforated metal grille - Durable black carpet covering - Two 1/4" input jacks and one NL4 four-pin receptacle
The RS210 bass speaker cabinet has 2 - 10" custom Eminence drivers and a 1” tweeter. This bass cab is deep, narrow, and easy to move. Two of them give you the sound impact of a 4x10 cab without the bulk and weight. Stack 2 RS 210 bass cabs vertically to create a column that maintains contact with the floor for full bass response but with the upper speaker up where you hear it better.
The all-new Rumble Series is a mighty leap forward in the evolution of portable bass amps. Rumble Series speaker cabinets have been re-voiced to produce a superior level of sonic detail and low-frequency translation. And for even greater performance and convenience, all Rumble cabinets are equipped with Fender"s patented Magnetic Rumble Head-Attachment System. Additional upgrades include Eminence drivers and premium HF compression tweeters.
The Markbass Standard 104HF bass cab features the power of ultra-light neodymium B&C speakers to give you a great power-to-weight ratio. So while the Standard 104HF pumps out plenty of sound, it's not a behemoth to carry around. The four 10" woofers surround the 1" HF compression driver with custom horn tweeter. The Standard 104HF bass cab is made of high-grade, multi-ply poplar manufactured to maximize sound quality. Protective corners and a grill protect the Markbass Standard 104HF when you're between shows. The 104HF was runner up in the Bass Player Magazine reader's poll.. The Markbass Sta... [Read More]
1x15 Bass Guitar Speaker Cabinet Model #: SA 115, Woofer: One 15" with a 50 ounce magnet and a 2.5" Kapton voice coil, 300 Watts RMS, 600 Watts Peak, Impedance: 8 Ohms, Frequency response: 40Hz 5000Hz, Sensitivity: 96 db, 5/8" plywood front panel, Black carpet with black metal corners, Recessed Handle, Full Metal Grill, Terminal cup with two 1/4" inputs, Dual Ports (both in the middle), hxwxd: 18" x 25" x 14", Weight: 48 pounds per cabinet, Condition: New, One Year Warranty. This listing is for one 15" bass guitar cabinet. You will receive one speaker cabinet, pictured and described above.The ... [Read More]
Maximum Power: 400W Frequency Response: 40Hz-2kHz Voice Coil Diameter: 2", 50.8mm Depth: 4.25", 108mm Coil Construction: Copper voice coil Magnet Composition: Ferrite magnet Cone composition: Paper Cone Nominal Basket Diameter:10", 254mm Sensitivity: 92 Magnet Weight: 38 ounce Core Details: Non-vented core Coil Former: Polyimide former
Model #: SA-115 Woofer: One 15" - with a 50 oz magnet and a 2.5" Kapton voice coil 200 Watts RMS, 400 Watts Peak Impedance: 8 Ohms Frequency response: 40Hz - 5000Hz Sensitivity: 96 db 5/8" plywood front panel Black carpet with black metal corners Recessed Handle Full Metal Grill Terminal cup with two 1/4" inputs Dual Ports (both in the middle) HxWxD: 18" x 25" x 14" Weight: 48 lbs per cabinet Condition: New One Year Warranty Model #: SA-210 Woofer: Two 10" - with a 50 oz magnet and a 2" Kapton voice coil 200 Watts RMS, 400 Watts Peak Impedance: 8 Ohms Frequency response: 40Hz - 5000Hz Se... [Read More]
Standard 104HR Rear-Ported Neo 4x10 Bass Speaker Cabinet 4 Ohm. The Markbass Standard 104HR is an exceptional, professional bass speaker cabinet that performs well in any club, big or small. The Standard 104HR cab puts out impressive power of 800W and weighs only 56 pounds. Working bassists will love the 104HR speaker cabinet for its power, high-quality sound and portability. Perfectly capable in a standalone situation, this bass speaker cab is even more ear-catching when combined with a Markbass Standard 151HR or 102HF.
100-watt Modeling Guitar Amplifier with 2x12" Speakers, 14 Digital Preamp Models, 4 Digital Power Amp Models, Speaker Emulation, 24 Onboard FX, LCD Display, Aux Input, Bluetooth Connectivity, and 2-channel Footswitch
Power Rating Watts 300W Music Program Resonance 51.Hz Usable Frequency Range 45Hz-3.0kHz Sensitivity 96.9 Magnet Weight 56 ounce Gap Height .38", 9.53mm Voice Coil Diameter 2.5", 63.5mm THIELE and SMALL PARAMETERS Resonant Frequency (FS) 51Hz DC Resistance (Re) 2.9 Coil Inductance (Le) 0.80mH Download PDF Spec Sheet Mechanical Q (QMS) 4.94 Electromagnetic Q (QES) 0.54 Total Q (QTS) 0.49 Compliance Equivalent Volume (Vas) 108.2 liters / 3.82 cu.ft. Mechanical Compliance of Suspension (CMS) 0.11mm/N BL Product (BL) 12.2 T-M Diaphragm Mass Inc. Air load (Mms) 87 grams Efficiency Bandwidth Product... [Read More]
The Acoustic B410C Classic 4x10” bass cabinet handles 400 watts through four traditional, custom-designed speakers loaded into a tour-tough plywood construction cabinet. This time-tested combination delivers a classic warm, smooth sound with plenty of low-end
The CX Series enclosures are the perfect compliment to the MB Series heads. The compact design and light weight allow you to create the ideal head and cabinet combination for any situation without sacrificing sound
The Markbass Standard 104HR is an exceptional, professional bass speaker cabinet that performs well in any club, big or small. The Standard 104HR cab puts out impressive power of 800W and weighs only 56 pounds.
© 10Toply.com - all rights reserved - Sitemap 10Toply.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com