The all-new Rumble Series is a mighty leap forward in the evolution of portable bass amps. Rumble Series speaker cabinets have been re-voiced to produce a superior level of sonic detail and low-frequency translation. And for even greater performance and convenience, all Rumble cabinets are equipped with Fender"s patented Magnetic Rumble Head-Attachment System. Additional upgrades include Eminence drivers and premium HF compression tweeters.
2x10 Bass Guitar Cabinet Model #: SA 210, Woofer: Two 10" each has a 50 ounce magnet with a 2" Kapton voice coil, 400 Watts RMS, 800 Watts Peak, Impedance: 8 Ohms, Frequency response: 40Hz 5000Hz, Sensitivity: 97db, 5/8" plywood front panel, Black carpet with black metal corners, Recessed Handle, Full Metal Grill, Terminal cup with two 1/4" inputs, Dual Ports (both in the middle), hxwxd: 18" x 25" x 14", Weight: 55 pounds per cabinet, Condition: New, One Year Warranty. The 2x10 Bass Guitar Speaker Cabinet gives you the full, tight tone that a bass cabinet should. With two 10"speakers you... [Read More]
Rift 46G - 4x6 Bass / Guitar Speaker Cabinet - Model #: SA-Rift_46G, Woofer: Four 6" - each has a 30 oz. magnet with a 1.5" Kapton voice coil, 250 Watts RMS, 500 Watts Peak, Impedance: 8 Ohms, Frequency response: 20Hz - 10kHz, Sensitivity: 92db, 5/8" plywood front panel, Tolex with black metal corners, Recessed Handle, Full Metal Grill, Terminal cup with two 1/4" inputs, HxWxD: 17.5"x16"x18", Weight: 36 lbs per cabinet, Condition: New, One Year Warranty If you are looking for big cabinet sound in a small cabinet, look no further! You have found it! This cabinet gives you BIG sound in a small p... [Read More]
- 400 watts program power handling - 800 watts peak - Two custom-designed 10" ceramic magnet woofers - 8 ohms impedance - 18mm ply cabinet with internal bracing and steel corners - 16-gauge perforated metal grille - Durable black carpet covering - Two 1/4" input jacks and one NL4 four-pin receptacle
This protective cover from Orange Amplification is a perfect fit for your 4 x 10 OBC Bass Cabinet. Keep your gear protected and looking as good as it sounds with this tough, durable vinyl padded fabric cover, bearing the bold Orange logo. Protect your gear and get the best prices from Sam Ash Direct; with the security of our many decades of experience and efficient order processing, your satisfaction is guaranteed!
High - performance, lightweight 2, 800 - watt bass cabinet with 4 x 10" turbosound speakers and 1" horn driver
The RS210 bass speaker cabinet has 2 - 10" custom Eminence drivers and a 1” tweeter. This bass cab is deep, narrow, and easy to move. Two of them give you the sound impact of a 4x10 cab without the bulk and weight. Stack 2 RS 210 bass cabs vertically to create a column that maintains contact with the floor for full bass response but with the upper speaker up where you hear it better.
The CX Series enclosures are the perfect compliment to the MB Series heads. The compact design and light weight allow you to create the ideal head and cabinet combination for any situation without sacrificing sound or portability. All CX cabinets are equipped with proprietary ceramic drivers designed and manufactured in the U.S.A. by GK and the same high frequency transducer found in the MB Series II combos and MBP powered enclosures.
The Ampeg PF-410HLF bass enclosure delivers the performance, looks and affordability of the popular Portaflex series in a powerful, shelf-ported design that hits hard and low. Featuring four 10 Inch Eminence drivers and a selectable HF driver, the 8 ohm PF-410HLF is more than capable of handling 800 watts of power. The poplar cabinet design is rugged, but still looks great with Ampeg black diamond tolex and chrome logo. Plus, integrated side handles and included casters are perfect for transportation. Mix and match with any Portaflex series cabinet to build the rig that's right for you. Delive... [Read More]
Our new K410 bass cabinet doesn't just look the part, it also sounds it. So if you're looking for massive amounts of low-end power and impeccable tone, K410's four custom-made 10" drivers and 1" ceramic tweeter are sure to deliver. The K410 is an 8 Ohm, 600W cabinet which ensures a loud and tight response on its own, but pair it with another K410 or one of the other K-series cabs you'll achieve an even richer and deeper tone, for a world of sonic options.
The Acoustic B410C Classic 4x10” bass cabinet handles 400 watts through four traditional, custom-designed speakers loaded into a tour-tough plywood construction cabinet. This time-tested combination delivers a classic warm, smooth sound with plenty of low-end
The CX Series enclosures are the perfect compliment to the MB Series heads. The compact design and light weight allow you to create the ideal head and cabinet combination for any situation without sacrificing sound
The Markbass Standard 104HR is an exceptional, professional bass speaker cabinet that performs well in any club, big or small. The Standard 104HR cab puts out impressive power of 800W and weighs only 56 pounds.
The Markbass Standard 104HR is an exceptional, professional bass speaker cabinet that performs well in any club, big or small. The Standard 104HR cab puts out impressive power of 800W and weighs only 56 pounds.
Ampeg's PN-410HLF is a modern, lightweight bass enclosure built to handle the power of high-output Ampeg bass heads. Designed and assembled in the USA out of the highest quality components, including four custom-designed 10-inch neodymium
© 10Toply.com - all rights reserved - Sitemap 10Toply.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com