Best Ar 15 Quick Release Scope Mounts - April 2024

Flat Top Offset One Piece QD Scope Mount with Quick Release Cam Locks 1913 Picatinny Rails

A very solid and heavy duty offset ring mount to install magnified optics scope for easier eye relief setup. Very helpful when mounting a scope with longer eyepiece tube, especially ones with illuminated reticles The QD cam locks can be finger adjusted when needed. With the cam lever at unlock position, pull up and rotate the star wheel on the opposite end of the clamping bolt to adjust Ring Size: 30mm (1inch metal size inserts included) Centerline Height - 40mm Machined from extruded aluminum alloy 6061 Anodized black matte finish Clamp attachment - two finger adjustable quick release cam l... [Read More]

• ASIN: B006MYCIOE
• UPC: 857155007855
• ASIN: B006MYCIOE
• Brand: Hammers
• Size: 30mm
• Manufacturer: Hammers

Monstrum Tactical Low Profile Picatinny Riser Mount with Quick Release, for Red Dots, Scopes, and Optics (0.5 inch H x 2.5 inch L)

The Monstrum Tactical low profile riser mount is designed for use with red dots, scopes and optics, allowing for sight clearance of front sights. 0.59 inch high in length and with a Picatinny standard rail mount, it will accommodate Picatinny or Weaver standard red dots, scopes, and other optics. It comes equipped with an easy to operate quick release mechanism that allows for fast and easy attachment and detachment, allowing you to quickly mount or remove your optic depending on need. The mounts attaches via a simple quick release lever rather than with sets screws and allen wrenches like tr... [Read More]

• ASIN: B00OYWJNSU
• UPC: 740016796855
• ASIN: B00OYWJNSU
• Brand: Monstrum
• Manufacturer: Monstrum

MIZUGIWA 1inch /30mm Quick Release Cantilever Weaver Forward Reach Dual Ring Rifle Scope Mount

1inch / 30mm Forward reach 1 Piece Rifle Scope Mount Airsoft One Piece Torch Mount with quick release Fits 20mm Weaver rails Comes with 25.4mm reducer inserts so you can use this with 30mm and 25 mm (1 inch) body tube rifle scopes. Built in Weaver style rails - very handy fitting flashlights and lasers etc. Front Lens Size: Up to 56mm - This figure describes the maximum size of the objective (front) lens. Reach Forward / Backward Design. Clamp Design: Triple Clamp (6 bolts on each cap) Finished in Tactical Matt Black. Measurements: The Overall length = 13.5cm Height from Rail to top of scope r... [Read More]

• ASIN: B01A5IF6EQ
• UPC: 600736993098
• ASIN: B01A5IF6EQ
• Brand: MIZUGIWA
• Manufacturer: Mizugiwa (BJ) Co.,Ltd

Monstrum Lockdown Series Adjustable Height Picatinny Riser Mount with Quick Release | 3.5 inch

• ASIN: B076Y1539Y
• UPC: 704715311948
• ASIN: B076Y1539Y
• Brand: Monstrum

Burris Optics 410342, 410343, 410344 P.E.P.R. Riflescope Mount, Ideal Mounting Solution, Featuring Picatinny Ring Tops

Discover the difference Burris P.E.P.R. Scope Mount makes in your accuracy and efficiency, no matter your shooting conditions or goals. Secure your rifle scope to the base using our full-ring and base mounting solution in one scope. Enjoy up to two inches of forward scope positioning, ensuring the ideal focus, every time. Plus, you will enjoy optimum eye relief and a full field of view. Models 410342 and 410344: Quickly attach or detach this Burris scope; both the 1-inch and 30-mm sizes offer quick-detach models. Additionally, the 34-mm size is designed with 20 MOA of built-in cant. Enjoy t... [Read More]

• ASIN: B004S76WTE
• UPC: 731244849246
• ASIN: B004S76WTE
• Brand: Burris
• Size: 1in
• Manufacturer: Burris Optics

Monstrum Slim Profile Series Cantilever Offset Dual Ring Picatinny Scope Mount with Quick Release | 1 inch Diameter

When lining up your shot, every last ounce counts! Which is why we designed the Monstrum Tactical Slim Profile Series of mounts to be sleeker and lighter than ever. Crafted from lightweight 6061 aluminum, the mount weighs in at a mere 6 ounces. At a weight comparable to a set of lightweight rings, it provides the added rigidity and convenience of a one piece mount. The mount is built for standard 1 inch tube scopes for mounting to any standard Picatinny rail equipped rifle. The offset design provides an additional 2 inches of forward extension, allowing extra flexibility for optimum eye relief... [Read More]

• ASIN: B07MJCT11L
• UPC: 704715312389
• ASIN: B07MJCT11L
• Brand: Monstrum
• Manufacturer: Monstrum

UTG 1"/2PCs Med Pro LE Grade Picatinny QD Rings: 22mm Wide

UTG 1"/2 Pcs. Med Pro LE Grade Pica tinny QD Rings: 22mm Wide Features: - 4-screw Medium Profile "Tiger" Ring - Precision Machined From Aircraft-grade Aluminum Alloy with Anodized Black Matte Finish - Robust and User Friendly Ergonomic Quick Detach/Lock Lever Fully Adjustable to Fit on Any Pica tinny Rail - High Quality Synthetic Protective Tape Applied on Rings Internal Surface - Tight Tolerance Control and Repeatable Positive Locking for Optimal Re-zero Performance - Extensively Field Tested under Extreme Operations and Well Received by Field Experts and Law Enforcement Personnel Specificati... [Read More]

• ASIN: B004HIHQLM
• UPC: 796793411832
• ASIN: B004HIHQLM
• Brand: UTG
• Size: Ring Diameter: 1"
• Manufacturer: Leapers Inc

ALONEFIRE Full Metal Weapon Light Mount Offset Picatinny Rail Mount for Guns Weapons Tactical Flashlight LED Torch with Quick Release and Grommet for Sports Outdoors Hunting Fishing Shooting Airsoft

Package list: 1 x offset picatinny mount with quick release lever black 2 x Hex screwdriver 1 x 30mm change to 25mm Grommet Description: Color:Black Material:Aluminum alloy Ring Diameter:30mm Rail Size:20mm Weight:82g

• ASIN: B019GXKQSW
• UPC: 713665325820
• ASIN: B019GXKQSW
• Brand: ALONEFIRE
• Manufacturer: Alonefire

Monstrum Offset Cantilever Dual Ring Scope Mount | 1 inch Diameter (Black)

The Monstrum Tactical Offset Dual Ring Picatinny Scope Mount is built to mount standard 1 inch tube scopes to any standard Picatinny rail equipped rifle. The offset design provides an additional 2 inches of forward extension, allowing extra flexibility for optimum eye relief and shooting position. The mount is 5.75 inches in total length. The base is 3 inches long with the mounting bolts spaced 2 inches apart, a minimum of 3 inches of rail space is required to install. The height between the top of the base to the bottom of the scope rings is 1 inch, providing 1 inch of vertical clearance. The... [Read More]

• ASIN: B06X9GNNR1
• UPC: 700118165447
• ASIN: B06X9GNNR1
• Brand: Monstrum
• Manufacturer: Monstrum

Monstrum Offset Cantilever Picatinny Scope Rings | 1 inch Diameter | Black

The Monstrum Tactical Offset Reversible Scope Ring Set is designed for mounting standard 1 inch diameter tube style rifle scopes.  The distinctive offset reversible design allows for added flexibility for scope placement and optimum eye relief. The rings extend forward 1.5 inch from the base and can be mounted in either direction, allowing for a variety of mounting options dependent on your preferred scope placement and your mounting system. The rings mount to any flat top Picatinny rail equipped rifle. High profile in height, it measures 0.8 inches from the base of the mount to the bottom o... [Read More]

• ASIN: B00YFPNDOG
• UPC: 740016797272
• ASIN: B00YFPNDOG
• Brand: Monstrum
• Manufacturer: Monstrum

MIZUGIWA 1 inch Cantilever Flat Top Weaver Forward Reach Dual Ring Rifle Scope Mount

Fits 20mm Picatinny Weaver rails, Flat Top Dual Ring Scope Mount for Vortex, Nikon, Leupold and other scopes, ar-pep Front ring top and both side feature picatinny for mounting laser flashlight and compact red dot and so on accessories.- 1" Rings Heavy duty - will hold up under heavy recoil sustained fire in the most extreme circumstances. Easy installation with minimal effort over the Barrel and the cleaning rod PEPR Proper eye position ready for combat riflescopes, mount provides 2" of forward scope positioning on the .223 flat top platform. Riser Mount for Rifles with Picatinny/Weaver Rail,... [Read More]

• ASIN: B06WVHJQT4
• UPC: 603161960925
• ASIN: B06WVHJQT4
• Brand: MIZUGIWA
• Manufacturer: Mizugiwa (BJ) Co.,Ltd

Monstrum Lockdown Series Adjustable Height Picatinny Riser Mount with Quick Release | 2.5 inch

Raise your optic to the next level with the Monstrum Tactical Lockdown Series Adjustable Height Riser Mount! Our exclusive adjustable height design allows for absolute precision placement of your optic based on your rifle setup or preferred cheek weld! The riser can be adjusted incrementally via two locking screws from 0.87 inches up to 1.14 inch of rise, measured from rail surface to rail surface. Built for use with Picatinny or Weaver base optics, our mounts will give you just the right amount of rise for optimal scope positioning and clearance over your front sights. Based off our best sell... [Read More]

• ASIN: B076XQQ8PK
• UPC: 704715311931
• ASIN: B076XQQ8PK
• Brand: Monstrum
• Size: 2.5 inch with Quick Release
• Manufacturer: Monstrum

Primary Arms Deluxe Rifle Scope Mount - 30mm

Primary Arms Deluxe 30mm Picatinny Scope MountThe Primary Arms Deluxe Scope Mount is ideal for 1913 Picatinny and similar "flat-top" mounting platforms. Aluminum construction, durable matte black anodized finish. 2.52 inches of clearance between the rings. Places the center of your 30mm tube scope 1.5 inches above the rail. Fits scopes with 30mm tubes. To make sure the mounting nut is fully tightened, turn the nut clockwise until resistance is encountered. After that, turn another 1/2 turn. If a torque wrench is being used, we recommend no more than 35-40 in-lbs.Specifications:Brand: Primary ... [Read More]

• ASIN: B00FGGIL9K
• UPC: 818500010197
• ASIN: B00FGGIL9K
• Brand: Primary Arms
• Manufacturer: Primary Arms

UTG 3X Magnifier with Flip-to-side QD Mount, W/E Adjustable

UTG Gen V 3X Magnifier with TS Platform, Precision Windage/Elevation Centering Adjustment, Max Strength Lever Lock Flip-to-side QD Picatinny Mount for Demanding Quick Aiming and Flip-to-side High Accuracy Target Identification with Alternative Precision Scope.

• ASIN: B00S2FWRGK
• ASIN: B00S2FWRGK
• Brand: UTG
• Manufacturer: LEABG

Monstrum Tactical 1" Offset Picatinny/Weaver Rail Mount for Flashlights with Quick Release

The Monstrum Tactical Offset 1" Picatinny Rail Mount with Quick Release is designed to mount tactical flashlights to rail equipped rifles and shotguns. It mounts to any Picatinny 1913 standard accessory rail with the flashlight offset to the side. It comes equipped with an easy to operate quick release mechanism that allows for fast and easy attachment and detachment, allowing you to quickly mount or remove your flashlight depending on need. The mounts attaches via a simple quick release lever rather than with sets screws and allen wrenches like traditional rail mounts. The mount is 1" in diam... [Read More]

• ASIN: B00NUBQX48
• UPC: 796254146112
• ASIN: B00NUBQX48
• Brand: Monstrum
• Manufacturer: Monstrum

Ade Advanced Optics 1x20 Infrared Red Dot Scope Sight Quick Release Mount for Night Vision Shooting Hunting

  Ade Advanced Optics Red dot  & Infrared Dot Scope Quick Release Mount   Night Vision Compatible  Model: RD4-005   Now have the capability of daytime use optics and at a push of a button, change it to a

• UPC: 182067135
• Rating: 1.0

3/4" Mini Riser & Offset 45 degree Angle Picatinny Quick Release Scope Mount

This is flat top picatinny riser with angled side mount. CNC Machined from 6061 Aluminum. They secure tightly to a standard picatinny rail and raise your scope 3/4".Includes:1 RiserSpecifications:Picatinny Standard railLow Profile raises your scope

• UPC: 165187990
• Color: White

Cvlife Optics Hunting Rifle Scope 6-24x50 AOE Red & Green Illuminated Crosshair Gun Scopes With Free Mounts

Cvlife Hunting Rifle Scope 6-24x50 AOE Red and Green Illuminated Gun Scope with Free MountThe CVLIFE 6-24*50 AOE Red & Green Illuminated Rifle Scope is made of high-strength aluminum alloy. Completely sealed and 100% nitrogen

• UPC: 224792253
• Rating: 4.75

Tactical 2.5-10x40 CQB Scope, R/G ILL. Mil-Dot, Quick Release

Product DescriptionObjective: 40mmMagnification: 2.5x-10xTube Diameter: 1"Parallax Setting: 100Reticle Type: Range FinderField of View (ft @ 100 yds): 32.0-11.0Eye Relief (in): 3.3Exit Pupil (mm): 7.0-3.6Weight (oz): 15.5Length (in): 13.50Battery: CR2032 3VW/E Click Value @ 100 yds

• UPC: 632337502

Cantilever Rifle Scope Mount For 30 & 25mm 1" Rings BUBBLE LEVEL Picatinny Base

This cantilever scope mount has inserts to accommodate both 30mm and 25mm (1") rifle scope diameters. It features a bubble level on the rear of the scope to ensure complete accuracy. Includes: 1 Cantilever Mount

• UPC: 780082328
• Rating: 4.0

Bushnell 2-7x32 AR Optics Rimfire Scope

The Bushnell 2-7x32 AR Optics Rimfire Scope has 1/2 MOA

• UPC: 24368095
• Model: BUS-AR92732
• Color: Multicolor
• Size: standard
• Rating: 4.667

Vortex 1-inch Riflescope Rings, Low, Picatinny/Weaver Mount, Set of 2,

Tube Diameter: 1Quantity: 2Ring Height: LowFabric/Material: 6061-T6 AluminumHeight: 0.63Attachment/Mount Type: Picatinny or Weaver

• UPC: 31200547
• Model: RING-L
• Color: Multicolor
• Rating: 5.0

Hammers 3-9x32AO Air Rifle Scope with One-Piece Mount

Hammers 3-9x32AO Air Rifle Scope with One Piece Mount Designed for use with high power spring air guns Built-in stop pin at bottom of mountAdjustable objective to 5feetFinger adjustable turret screws Include bungee-corded lens

• UPC: 49665413
• Model: SA3932AO
• Rating: 4.625

Trinity Force 30mm Monolithic Quick Detach Scope Mount w/top rail and 1 inch inserts MN30ZTQCB

Trinity Force 30mm Monolithic Quick Detach Scope Mount w/top rail and 1 inch inserts

• UPC: 169643056

Presma PRWG040 30mm Quick Release High Profile Scope Rings for Picatinny/Weaver Rails

Presma Wing Series Quick Release two picecs 30 mm high profile Scope

• UPC: 133280072
• Model: PRWG040
• Color: BlackMatte Black