Best Bipod For M1a - April 2024

SPRINGFIELD ARMORY Sprgfld M1A M2 Bipod

Description:M2 BipodFor improved stability. Attaches to rifle by clamping around the gas cylinder.Additional Information:

• ASIN: B0044JR69G
• UPC: 706397852306
• ASIN: B0044JR69G
• Brand: SPRINGFIELD ARMORY
• Manufacturer: Springfield Armory

M1A / M14 Bipod Adapter

This adapter will work on any M14 or M1A rifle with wood or polymer stock With this adapter you can install a "Sling Swivel Stud" on your stock so you can attach any Harris Bipod to it. works with the M1A or M14 rifles with both Wood or Polymer stocks

• ASIN: B00HQ4LORQ
• UPC: 862963000059
• ASIN: B00HQ4LORQ
• Brand: MIM Manufacturer bipod accessory
• Manufacturer: MIM

Sadlak Industries M14/M1A Heavy Duty Front Rail with Internal Nutplate QD Stud (for Harris QD Bipods)

Shown with original USGI sling swivel (not included) Sadlak Industries M14/M1A Heavy Duty Front Rail with Internal Nutplate Sadlak Industries M14/M1A Heavy Duty Front Rail with Internal Nutplate Shown with an aditional 3 slot rail click to enlarge The Heavy Duty Model with the QD Stud shown at the left takes advantage of the Sadlak Internal Oval Nutplate using two socket head screws installed externally through the two counterbored holes in the rail. This model allows the removal or replacement of the rail without removing the stock. Depending on the stock, initial installation of the interna... [Read More]

• ASIN: B007855L2M
• UPC: 091037134349
• ASIN: B007855L2M
• Manufacturer: Sadlak Industries

Sadlak Industries M14/M1A Light Duty Aluminum Front Rail with QD Stud

Once the Front Rail is installed you have flexibility of attaching a clamp-on type Bi-Pod or, with Front Rail with QD Stud a Harris QD type bipod. All hardware and screws have mil-spec. Manganese Phosphate finish.

• ASIN: B0078FF0U0
• UPC: 091037134394
• ASIN: B0078FF0U0
• Manufacturer: Sadlak Industries

SADLAK M14/M1A Front Rail, Aluminum Low Profile Rail

The SADLAK M14/M1A Front Rail, Aluminum Low Profile Rail are our light weight and low cost option to the more robust steel rail. An internal nut plate is not used with these models. Dimensions are 3" Length x 3/4" Width x .5" Height. The Aluminum Rail is attached with two internal screws and special washers, while still retaining your stock sling swivel.The SADLAK Front Rail Mounting System is designed for clamp-on type bi-pods and accessories with an optional QD Post to attach Harris bi-pods while retaining your stock sling swivel. Steel Models uses unique internal Oval Nut plates specificall... [Read More]

• ASIN: B0078FEI1W
• UPC: 091037134387
• ASIN: B0078FEI1W
• Brand: SADLAK
• Manufacturer: Sadlak Industries

SADLAK M14/M1A Front Rail, Steel Low Profile with Internal Nutplate

The SADLAK Front Rail Mounting System is designed for clamp-on type bi-pods and accessories with an optional QD Post to attach Harris bi-pods while retaining your stock sling swivel. Dimensions are 3" Length x 3/4" Width x 1/2" Height. Steel Models uses unique internal Oval Nut plates specifically designed to fit the contour of four popular M14/M1A stocks. Once the nut plate is installed, the rail can be installed or removed without rifle disassembly using two external screws through counter bored holes in the rail. The interior nut plate provided with Heavy Duty Front Rail is a lot more power... [Read More]

• ASIN: B0078558KC
• UPC: 091037134332
• ASIN: B0078558KC
• Brand: SADLAK
• Manufacturer: Sadlak Industries

Accessory MIL-STD-1913 (Picatinny) Rail for Springfield Armory M1A (Wooden Stock)

150-807 MIL-STD-1913 conversion pica tinny rail M1A and M14 bipod mount our pica tinny rail with sling loop adapter for permanent bipod attachment to the M14 and M1A rifle. This accessory bipod rail mount is compatible with all MIL-STD-1913 accessories. Includes 3 ¼ rail with sling loop, two mounting screws and washers. Not for use on synthetic stocks. We have another listing available for the synthetic stocks. Take a look at our other listings, or search for part: 150-807B.

• ASIN: B000G76IS0
• UPC: 755377158075
• ASIN: B000G76IS0
• Brand: Versa Pod
• Size: none
• Manufacturer: KFS Industries Inc.

HARRIS BI-POD BIPOD RAIL ADAPTER MOUNT ADAPTOR

• ASIN: B0068YRMOY
• ASIN: B0068YRMOY
• Brand: TACBRO

UTG New Gen Clamp-on Bipod, Steel Feet, Cent Ht 9"-11"

UTG Clamp-on Sniper bipod with adjustable barrel locking feature, foldable with Tip-Proof posi-lock, Extendable legs with spring tension & lockable collar for fine adjustments, steel feet, center height 9" to 11", fits barrel diameter 0.43" - 0.75".

• ASIN: B017DB25AQ
• ASIN: B017DB25AQ
• Brand: UTG
• Size: 8.7"-10.2"
• Manufacturer: Leapers, Inc.

BRMS Harris bipod, 6" to 9" Swivels (tilts), notched legs spring loaded

Harris bipod extends from 6" to 9" Swivels (tilts) Legs have notches in 1" increments Legs are spring loaded for bench rest and prone shooting Attaches to the sling swivel stud

• ASIN: B01MCZ2CCH
• UPC: 859343005223
• ASIN: B01MCZ2CCH
• Brand: Harris Bipods
• Manufacturer: Harris Engineering

CVLIFE 6-9 Inches Tactical Rifle Bipod Adjustable Spring Return with Adapter

Specification: Color: Black Material: Hardened steel and aluminum Leg Height:6 inches/ 152mm (retracted) ; 9 inches / 225 mm (fully extended) Light weight : 10ozs Feature: Leg length can be adjusted from 6 to 9 inches. The legs can be folded forward or backward. Heavy duty and made of hardened steel and aluminum. Package Included: 1 x 6-9 inches Bipod 1 x Mount Adapter

• ASIN: B01E4YVCOA
• ASIN: B01E4YVCOA
• Brand: CVLIFE
• Size: 6-9
• Manufacturer: Huihaozi

Harris Engineering NO. 2R Radiused Flange Nut-Wood Fore-End

Flange nut which has a radiused flange for mounting to wood or polymer forends under gas tubes. Harris Engineering NO. 2R radiused flange nut-wood fore-end

• ASIN: B0007OGT40
• UPC: 511560002224
• ASIN: B0007OGT40
• Brand: Harris
• Manufacturer: RSR Group, Inc

Versa Pod 150-807B Conversion Accessory Picatinny Rail Mount M1A and M14 (Socom/Synthetic Stock)

The Versa-Pod M1A M14 picatinny rail M14 adapter. Replaces existing standard-issue front sling swivel on Socom synthetic stock. Provides a 3.25" long MIL-STD-1913 picatinny rail for attachment of accessories and bipods. Not for use on wood stocks. We have another listing available for the wood stock M14 or M1A. Take a look at our other listings, or search for part number: 150-807.

• ASIN: B00BM5CZTQ
• UPC: 755377158174
• ASIN: B00BM5CZTQ
• Brand: Versa Pod
• Manufacturer: KFS Industries Inc.

Case Club Pre-Made Springfield M1A Waterproof Rifle Case with Accessory Box and Silica Gel to Help Prevent Gun Rust

The Case Club Springfield M1A Rifle Case is the most versatile and toughest M1A Case that there is. For those looking to upgrade from their factory M1A bag to a hard case, there is no better option. The precut foam will fit Springfield M1A SOCOM 16, Scout Squad, Standard, Loaded, National Match, Super Match, and Garand rifles. The case will also hold your rifle magazines, full size or compact pistol, pistol magazines, silica gel canister (included), waterproof accessory box (included), & more in the generic accessory pockets. The case itself is weatherproof, dustproof, & has a built in pressur... [Read More]

• ASIN: B06WWF667T
• UPC: 856792005859
• ASIN: B06WWF667T
• Brand: Case Club
• Manufacturer: Case Club

Harris Bipod HBRMS

Extends from 6 to 9 inches Swivels (Tilts) to keep rifle straight when used on uneven surfaces. Has notched legs in I inch increment Legs are spring loaded for faster deployment 100% made in the USA Original Harris bipod

• ASIN: B01N07T049
• UPC: 859343005247
• ASIN: B01N07T049
• Brand: Harris Bipod
• Manufacturer: Harris Bipod

Tbest Gun Stand AR Bipod SWAT OP Adjustable Mount Height Rail Bipods, 6-9 Inches Tactical Rifle Bipod Adjustable Spring Return for Hunting and Shooting

Features:Heavy duty and made of hardened steel and aluminum. With a non rusting black anodized finish.Adjustable leg length (5 settings) with return springs.Compact and light weight. Quickly attach or detach from the rifle using the

• UPC: 234219607
• Model: Tbest
• Color: Black
• Size: 7.375" x 3.375" x 2.5"7.375\"

Bipods for Shooting, Knifun 9-14in Shooting Bipods for Rifles with Adapter Tactical Rifle Bipod Adapter Adjustable pring Return for Hunting Shooting

Bipods for Shooting, Knifun 9-14in Shooting Bipods for Rifles with Adapter Tactical Rifle Bipod Adapter Adjustable pring Return for Hunting ShootingDescription:Thisitem is made of quality material with fine craftsmanship, it'slightweight, portable, durable. Features with the

• UPC: 124496268
• Model: Knifun bipods for shooting
• Color: Black

CVLIFE 6-9 Inches Rifle Bipod, Quick Release Adapter Included for Hunting, w/ 20mm Picatinny Rail Mount Adapter

CVLIFE 6-9 Inches Rifle Bipod, Quick Release Adapter Included for Hunting, w/ 20mm Picatinny Rail Mount Adapter Specifications- Color: Black- Material: Hardened steel and aluminum- Leg Height: 6 inches/ 152mm (retracted); 9 inches / 225

• UPC: 511791320

Magpul® Bipod for 1913 Picatinny Rail - BLACK

Magpul Bipod for Picatinny Rail, Black - MAG941-BLKMagpul® BipodThe Magpul Bipod for 1913 Picatinny Rail offers serious strength and versatility at a price that provides unmatched value. Rich with important features, our lightweight Mil-spec hard

• UPC: 543780288

CVLIFE 8-10 Inches Military Foregrip Swivel Foldable Bipod, w/ Tactical 20mm Rail for Gun Rifle

CVLIFE 8-10 Inches Military Foregrip Swivel Foldable Bipod, w/ Tactical 20mm RailThis is a light spring metal bipod for guns, the spring legs can be adjusted and you can pulling the leg from 8 to

• UPC: 269345418

Caldwell Bipod Adaptor for Picatinney Rail

The Bipod adapter quickly and easily attaches to a picatinny rail. Any standard bipod or sling can then be attached to the integrated swivel stud. A curved "fore-end style" profile assures the perfect fit for

• UPC: 33589541
• Model: 535423
• Color: Black
• Rating: 5.0

American Defense Mfg. Mount, Picatinny for Harris Bipod, Quick Release, Black

The AD-BP Bipod Mount enables you to attach a Harris bipod to your railed forearm. Not compatible with the Tac Lever (Lever interferes with the bipod itself). It is precision machined from 6061 T6 aluminum

• UPC: 44678570
• Model: BP
• Color: Black

Spiked Feet (Black) for GBO CNC QD Tactical Bipod, Quick Install, Quick Release, (2 Pack)

Bipod Quick Change Spike Feet Bipod Feet Replacement 2pcs CNC Aluminum BlackDramatically Increased Stability, Grips on ANY Surface!Reduced Shooter Fatigue!Rugged Good Looks!Dramatically improve your shooting experience in all terrain and weather conditions with the Bipod

• UPC: 287500198

Monstrum Tactical Bipod Adaptor for Keymod Systems

Mount your bipod directly to your rifle quickly and securely with the Monstrum Tactical Bipod Adaptor for Keymod Systems! The adaptor is compatible with all Harris style bipod models. Attachment and detachment of bipod takes

• UPC: 817302397

Magpul® Bipod for M-LOK - BLACK

Magpul® BipodThe Magpul Bipod for M-LOK offers serious strength and versatility at a price that provides unmatched value. Rich with important features, our lightweight Mil-spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings

• UPC: 593440100