Standard Accessories 1. Main unit 2. Power supply (Wall plug in transformer) 3. Battery charger 4. Protective light shield 5. 8mm turbo light guide, plus whitening tip,20 pcs sleeves 6. Operation manual Technical Parameters: Power voltage AC100-240V 50-60Hz Input power 10W Light intensity 2300mw/cm Wavelength 400-500nm Model and signification Model YS-B Installation Instructions: Please follow the below 1.Plug the charger to the net power socket, the indicator light is on. 2.Put the charge socket on a horizontal plane, connect with the charger pin the indicator light is on. 3.Put the Curing Li... [Read More]
Technical: 1.Light source: blue light 2.Wave length: 430nm-485nm 3.Output intensity:900mw/cm2-1500mw / cm2 4.Power supply: rechargeable Lithium battery 3.7V/2200mAh 5.Input adapter: 100V to 240V~50Hz/60Hz (Available for global users.) 6. Safety kind: Ordinary type B.non-continuous service Ip40.Class 2. 7.Working condition: environment temperature: 5℃-40℃; relative humidity:≤80% 8.The fiber rod can be autoclaved up to the tempreture134 °C / 273 °F & pressure 0.2Mpa. 9.Digital LED screen display, clear operation. 10.Four sets of working time: 5s, 10s, 15s, 20s.Three working modes... [Read More]
Feature: Light source: blue light Wave length: 430nm-485nm Output intensity:1400mw/cm2 Power supply: rechargeable Lithium battery 2200mAh Input adapter: 100V to 240V~50Hz/60Hz (Available for global users.) Safety kind: Ordinary type B.non-continuous service Ip40.Class 2. Working condition: environment temperature: 5℃-40℃; relative humidity:≤80% The fiber rod can be autoclaved up to the tempreture134 °C / 273 °F & pressure 0.2Mpa. Digital LED screen display, clear operation. Four sets of working time: 10s, 20s, 30s, 40s with full power working mode. Packing Main Unit*1 Light Gui... [Read More]
Features: Wireless led light with charging 5W big power LED With a maximum more than 1500mW/cm2 Constant light intensity. The solidification effect is not affected by the consumption of remaining power Elegance design, very convenient for operationv Noiseless operation Low battery alert Three working models: strong, gradually strong, flashing Use import LED, big power, intensity and longevity, save energy The special design of charger base can be also used for holding the handle It can solidify 2-3mm deepness in a few seconds Can be used Worldwide 100V-240V With blue high sensitive brightnes... [Read More]
CURING Shield is a hand-held visible light shield, which effectively blocks out potentially harmful ultraviolet and blue light at wavelengths shorter than 525 nanometers which, after prolonged exposure, may cause photochemical burn of the retina.Protect dentist and assistant simultaneously from harmful UV and blue light.Light weight can be held by patient, assistant or free hand of operator.Is not cumbersome or expensive like eyeglasses.Does not restrict your visibility.Can be sterilized in cold solutions.
3 Solidification Working Mode: -Strong Mode; -Flashing Mode; -Gradually Mode; Sound Alert Feature: -Can be used Worldwide 100v-240v -Color: Silver Specification: Input Voltage: AC100V-240V, 50-60HZ Output Voltage:DC3.7V Battery: 4.2V 1500mAh lithium-ion battery Size: 16 x 3 x1.5cm Weight: 235g Package Contents: 1 x Main Unit 1 x Holder 1 x Charger 1 x User Manual 1 x Whitening Tip
Technical Data: 1. Light source: blue light 2. Wave length: 430nm-485nm 3. Output intensity:1400mw/cm2 4. Power supply: rechargeable Lithium battery 2200mAh 5. Input adapter: 100V to 240V~50Hz/60Hz (Available for global users.) 6. Safety kind: Ordinary type B.non-continuous service Ip40.Class 2. 7. Working condition: environment temperature: 5℃-40℃; relative humidity:≤80% 8. The fiber rod can be autoclaved up to the tempreture134 °C / 273 °F & pressure 0.2Mpa. 9. Digital LED screen display, clear operation. 10. Four sets of working time: 10s, 20s, 30s, 40s with full power worki... [Read More]
Feature: ·Light meter attached. ·Built-in fan to avoid heat. ·The battery can be replaced. ·OLED screen. All angles visible. ·Automatic memory. Avoid setting frequently. ·Ergonomics design, more comfortable in operation. ·Three working modes with three criteria of light intensity. Stable output of light intensity, the solidification effect is not affected by the consumption of remaining power. ·Efficient transfer from electricity into light. A full charge can be used for more than 500 times continuously under 10s working time mode. Technical Specifications: Power input: AC100V-240V 50H... [Read More]
Features: Wireless light with charging Elegance design, very convenient for operation. Four modes of working time 10,20,30,40 seconds Use import LED, big power, intensity and longevity, save energy The special design of charger base can be also used for holding the handle Low consumption of standby power with forty days' standby time Cordless design without no cable connect to the unit which could be used very conveniently With blue high sensitive brightness, can cure the resin which the wavelength of 420 -480nm Automatic shut down function(120s no any operation) Constant light intensity. The ... [Read More]
Technical: 1.Light source: blue light 2.Wave length: 430nm-485nm 3.Output intensity:900mw/cm2-1500mw / cm2 4.Power supply: rechargeable Lithium battery 3.7V/2200mAh 5.Input adapter: 100V to 240V~50Hz/60Hz (Available for global users.) 6. Safety kind: Ordinary type B.non-continuous service Ip40.Class 2. 7.Working condition: environment temperature: 5℃-40℃; relative humidity:≤80% 8.The fiber rod can be autoclaved up to the tempreture134 °C / 273 °F & pressure 0.2Mpa. 9.Digital LED screen display, clear operation. 10.Four sets of working time: 5s, 10s, 15s, 20s.Three working modes... [Read More]
Technical Parameters: Output power-----------5W Size ------------diameter 270*208*118mm Weight---------720g Working voltage--------100-240V AC, 50-60HZ 1. Blue-ray output wavelength: 430-485nm 2. Gradually bright, shiny,bright-wide, the work of three models to choose 3. Three gear output timing: 5s 10s 15s 20s 25s 30s 35s 40s 4. Blue-ray illumination: 5W≥18 5. The effect of curing time: 6s: 2-3mm Packing List: Main engine of light Device------1 set Optical Fiber-------------------1 piece Battery-----------------------1 piece Battery Charge Seat---------------1 set Shade Board ---------------... [Read More]
Fusion Flo is an excellent flowable composite that delivers high strength & wear resistance. It is characterized by optimum surface affinity, penetrates into most difficult area. It combines esthetics as well as flow on demand handling for use.
Installation instructions : Please follow the below 1.Plug the charger to the net power socket, the indicator light is on. 2.Put the charge socket on a horizontal plane, connect with the charger pin the indicator light is on. 3.Put the Curing Light into the charger socket. Standard accessories : 1. Curing light (1 Lithium-ion battery included) 2. Power supply (Wall plug in transformer) 3. Battery charger 4. Protective light shield 5. 8mm turbo light guide, plus whitening tip 6. Operation manual Isle 8, column 2; row 2
Technical: 1.Light source: blue light 2.Wave length: 430nm-485nm 3.Output intensity:900mw/cm2-1500mw / cm2 4.Power supply: rechargeable Lithium battery 3.7V/2200mAh 5.Input adapter: 100V to 240V~50Hz/60Hz (Available for global users.) 6. Safety kind: Ordinary type B.non-continuous service Ip40.Class 2. 7.Working condition: environment temperature: 5℃-40℃; relative humidity:≤80% 8.The fiber rod can be autoclaved up to the tempreture134 °C / 273 °F & pressure 0.2Mpa. 9.Digital LED screen display, clear operation. 10.Four sets of working time: 5s, 10s, 15s, 20s.Three working modes... [Read More]
Introduction : Imported high power LED and four chips inside. Blue-ray output wavelength:430-485nm. Gradually bright, shiny,bright-wide, the work of three models to choose. Three gear output timing:4s, 6s, 8s. Blue-ray illumination: 10W>=2000mw/cm2 The effect of curing time:6s: 2-3mm. Any brand can be cured resin material. Three power options: A type: Li-ion battery power: B type: AC110-240V power supply, C type: AC24V power Reliable structure and easy operation Specification: Input power: 10W Voltage range of the charge: AC 110-250V, 50-60HZ Three gear output timing: 4s, 6s, 8s Lithium Batter... [Read More]
5W Cordless Dental LED Curing Light Lamp 1500mw/cm2This cordless dental LED curing light features constant high light output for fast and smooth resin material curing including composites and sealants. It’s preset with three working modes
1PC Dental Curing Light Wireless Cordless LED Light Lamp 1200-2000mwFeature:100%brand new and high quality.Wave length:420nm-480nmBattery voltage:4.2VBattery:Lithium-ion batteryCapability of battery:1400mAhColor:Blue.Black.Red.SilverNote:We will offer free power adapter for your shipping address.ThanksPlease be reminded that due lighting effects,monitor's brightness/contrast
Features: Model: LED.B Wireless Long standby time Working more efficiently Function Keys: ON/OFF Button: 1. Turn on or turn off the LED blue-ray output. 2. Can make the machine run. Time Setting: 5s, 10s, 15s,
Features:Model: LED.BWirelessLong standby timeWorking more efficientlyFunction Keys:ON/OFF Button:1. Turn on or turn off the LED blue-ray output.2. Can make the machine run.Time Setting: 5s, 10s, 15s, 20s, 25s, 30s, 35s, 40s.Technical:Charger input: 110V-240VAC 50-60HzThe charger
Note: This item is ONLY for 110V, not for 220-240V. Please confirm the voltage of your area before placing an order.DescriptionThis curing light is specially designed for detal solidification orthodontics, it comes with built-in powerful
© 10Toply.com - all rights reserved - Sitemap 10Toply.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com