Best Jb Weld For Metal - May 2024

J-B Weld 8281 Professional Size Steel Reinforced Epoxy Twin Pack-10 oz, 10. Fluid_Ounces

J-B Weld is The Original Cold Weld two-part epoxy system that provides strong, lasting repairs to metal and multiple surfaces. Mixed at a ratio of 1:1, it forms a permanent bond and can be shaped, tapped, filed, sanded and drilled after curing. At room temperature, J-B Weld sets in 4-6 hours to a dark grey color. A full cure is reached in 15-24 hours. J-B Weld has a tensile strength of 3960 PSI and sets to a hard bond overnight. It can withstand temperatures up to 550ºF when fully cured.

• ASIN: B014OVHAOY
• UPC: 043425082817
• ASIN: B014OVHAOY
• Brand: J-B Weld
• Size: 10 oz
• Manufacturer: JBWeld

J-B Weld 8265S Original Cold-Weld Steel Reinforced Epoxy - 2 oz.

J-B Weld is The Original Cold Weld two-part epoxy system that provides strong, lasting repairs to metal and multiple surfaces. Mixed at a ratio of 1:1, it forms a permanent bond and can be shaped, tapped, filed, sanded and drilled after curing. At room temperature, J-B Weld sets in 4-6 hours to a dark grey color. A full cure is reached in 15-24 hours. J-B Weld has a tensile strength of 3960 PSI and sets to a hard bond overnight. It can withstand temperatures up to 550ºF when fully cured.

• ASIN: B0006O1ICE
• UPC: 043425006554
• ASIN: B0006O1ICE
• Brand: J-B Weld
• Size: 2 oz
• Manufacturer: JBWeld

J-B Weld 8276 KwikWeld Quick Setting Steel Reinforced Epoxy - 2 oz.

J-B KwikWeld is a fast setting version of The Original J-B Weld two-part epoxy cold weld system that provides strong, lasting repairs to metal and multiple other surface types. After mixing, it forms a permanent bond and can be shaped, tapped, filed, sanded and drilled after curing. J-B KwikWeld has a 1:1 mixing ratio, sets in 6 minutes and is fully cured in 4-6 hours. J-B KwikWeld cures to a dark grey color, is rated at a tensile strength of 2424 PSI and will withstand temperatures up to 300ºF.

• ASIN: B0006O1ICY
• UPC: 012304144588
• ASIN: B0006O1ICY
• Brand: J-B Weld
• Size: 2 oz
• Manufacturer: JBWeld

JB Weld 8277 Waterweld

This epoxy putty will plug holes and make permanent repairs in moist-surface or under water applications, Will even repair leaking fuel tanks, Simply pull off the amount of Waterweld necessary for the job, knead it with your fingers until the two colors are thoroughly mixed, then push the product into the hole, Will fully cure in 20-30 minutes, Can be drilled, sanded, filed, tapped, machined, and painted, Nontoxic and approved by the National Sanitation Foundation for use with potable water, 300 F maximum intermittent temperature, 250 F maximum continuous temperature, 1000 psi lap shear tensil... [Read More]

• ASIN: B00DNVLJ7Q
• UPC: 043425008770
• ASIN: B00DNVLJ7Q
• Brand: J-B Weld
• Manufacturer: J-B Weld Co

J-B Weld 8280 Original Professional Size Steel Reinforced Epoxy - 10 oz.

J-B Weld is The Original Cold Weld two-part epoxy system that provides strong, lasting repairs to metal and multiple surfaces. Mixed at a ratio of 1:1, it forms a permanent bond and can be shaped, tapped, filed, sanded and drilled after curing. At room temperature, J-B Weld sets in 4-6 hours to a dark grey color. A full cure is reached in 15-24 hours. J-B Weld has a tensile strength of 3960 PSI and sets to a hard bond overnight. It can withstand temperatures up to 550ºF when fully cured.

• ASIN: B000ALG8LO
• UPC: 094724642523
• ASIN: B000ALG8LO
• Brand: J-B Weld
• Size: 10 oz
• Manufacturer: JBWeld

J-B Weld 37901 6 Pack 3 oz. Extreme Heat Temperature Resistant Metallic Paste

• ASIN: B01ID9NM2W
• UPC: 043425379016
• ASIN: B01ID9NM2W
• Manufacturer: Jb Weld Company

J-B Weld 37901 Extreme Heat High Temperature Resistant Metallic Paste - 3 oz.

J-B Weld ExtremeHeat is formulated to allow for repairs to iron, steel and metal in high temperature environments (2400°F / 1300°C). When fully cured, this metallic compound can be drilled, machined or sanded. It is great for repairing cracks, small gaps, seam connections or holes in exhaust manifolds, pipe connections, mufflers, catalytic converters, outdoor grills, fire boxes, gas and commercial furnaces and water heaters. This product is water based, non-flammable and contains no solvents or Volatile Organic Compounds (VOCs).

• ASIN: B01IBOBY74
• UPC: 043425379016
• ASIN: B01IBOBY74
• Brand: J-B Weld
• Size: 3 fl. oz
• Manufacturer: JBWeld

J-B Weld 50176 KwikWeld Steel Reinforced Epoxy Syringe - Dark Grey - 25 ml

J-B KwikWeld is a fast setting version of The Original J-B Weld two-part epoxy cold weld system that provides strong, lasting repairs to metal and multiple other surface types. After mixing, it forms a permanent bond and can be shaped, tapped, filed, sanded and drilled after curing. J-B KwikWeld has a 1:1 mixing ratio, sets in 6 minutes and is fully cured in 4-6 hours. J-B KwikWeld cures to a dark grey color, is rated at a tensile strength of 2424 PSI and will withstand temperatures up to 300ºF.

• ASIN: B009EU5ZMA
• UPC: 798804241407
• ASIN: B009EU5ZMA
• Brand: J-B Weld
• Manufacturer: JBWeld

J-B Weld 10 oz 8270 KwikWeld Industrial Professional Size-10 oz

J-B KwikWeld is a fast setting version of The Original J-B Weld two-part epoxy cold weld system that provides strong, lasting repairs to metal and multiple other surface types. After mixing, it forms a permanent bond and can be shaped, tapped, filed, sanded and drilled after curing. J-B KwikWeld has a 1:1 mixing ratio, sets in 6 minutes and is fully cured in 4-6 hours. J-B KwikWeld cures to a dark grey color, is rated at a tensile strength of 2424 PSI and will withstand temperatures up to 300ºF.

• ASIN: B005UYVIXO
• UPC: 043425082701
• ASIN: B005UYVIXO
• Brand: J-B Weld
• Size: 10 oz
• Manufacturer: JBWeld

J-B Weld 8277 WaterWeld Epoxy Putty Stick - 2 oz.

WaterWeld will plug or seal leaks and patch holes and cracks in almost anything. Ideal for repairing plumbing, fuel tanks, tub and shower, drains, pool and spa, boats and potable water tanks; setup occurs even under water. After curing, it can be drilled, tapped, filed, sanded and painted. WaterWeld has a set time of 15-25 minutes and sets hard in one hour. WaterWeld cures to an off-white color, is rated at a tensile strength of 900 PSI and will withstand temperatures up to 300ºF.

• ASIN: B000BRQ0TW
• UPC: 043425082770
• ASIN: B000BRQ0TW
• Brand: J-B Weld
• Size: 1 Pack
• Manufacturer: JBWeld

J-B Weld 50112 ClearWeld Quick-Setting Epoxy Syringe - Clear - 25 ml

ClearWeld is a quick setting, multipurpose two part epoxy that provides a strong and lasting bond on most surfaces including tile, most plastics, ceramic, glass, wood and metal. ClearWeld is designed to cure with a clear, transparent bond when used at thicknesses of less than 15 mil. ClearWeld has a 1:1 mixing ratio, sets in 5 minutes and cures in 1 hour. With a tensile strength of 4400 PSI, ClearWeld sets to a hard, permanent bond.

• ASIN: B009EU5ZM0
• UPC: 044111320237
• ASIN: B009EU5ZM0
• Brand: J-B Weld
• Size: 0.85 oz.
• Manufacturer: JBWeld

J-B Weld 50139 Plastic Bonder Body Panel Adhesive and Gap Filler Syringe - Dries Black - 0.25 Milliliter (2 Pack)

Adhesive Type: Epoxy Moisture Resistant: Yes Drillable: Yes Adhesion Level: High Strength Sandable: Yes Holding Power: 3,770 psi

• ASIN: B01ID86S9M
• UPC: 043425501394
• ASIN: B01ID86S9M
• Brand: J-B Weld
• Size: 25 ml (2 Pack)
• Manufacturer: J-B Weld

J-B Weld 2110 Metal Fuel Tank Repair Kit

Tank Weld is hand-mixable, steel-reinforced, non-rusting epoxy putty that quickly repairs or rebuilds anything made of metal. After mixing, it forms an industrial-strength polymer compound that can be molded into shapes or used to build up, patch and repair steel components. TankWeld sets in 5 minutes and after 60 minutes, can be drilled, tapped, machined, ground, filed and painted. AutoWeld cures to a dark grey color, is rated at a tensile strength of 900 PSI and will withstand temperatures up to 300 degrees F.

• ASIN: B01IOPE65M
• UPC: 043425021106
• ASIN: B01IOPE65M
• Brand: J-B Weld
• Manufacturer: JBWeld

J-B Weld 37901 2 Pack 3 oz. Extreme Heat Temperature Resistant Metallic Paste

J-B Weld 37901 2 Pack 3 oz. Extreme Heat Temperature Resistant Metallic Paste

• ASIN: B01N2Z1K11
• UPC: 043425379016
• ASIN: B01N2Z1K11
• Brand: J-B Weld
• Size: 2 Pack
• Manufacturer: Jb Weld Company

J-B Weld 8297 HighHeat 550 Degree Epoxy Putty Stick - 2 oz.

HighHeat is a hand mixable epoxy putty stick specifically formulated to bond and repair materials that will be exposed to high temperatures in automotive and industrial maintenance applications. It cures to a tough, hard bond with little to no shrinkage. This industrial-strength product outperforms conventional epoxy putties at high temperatures and sets in 1 hour at room temperature. After 8 hours, it can be drilled, tapped, machined, ground, filed and painted. HighHeat is rated at a tensile strength of 800 PSI and cures to a machine grey in color. It is able to withstand continuous heat... [Read More]

• ASIN: B007PP26RI
• UPC: 012304151029
• ASIN: B007PP26RI
• Brand: J-B Weld
• Size: 2 Ounce
• Manufacturer: JBWeld

JB Weld JB Original

JB Weld JB Original

• UPC: 16494345
• Model: 8265-S
• Color: STEELOther
• Size: Adhesives: Epoxy
• Rating: 4.611

J-B WELD 8277 Epoxy Adhesive, Underwater, 2 oz, Stick

For those times you need a strong adhesive, get JB Weld Waterweld Epoxy Stick 2 Oz. It enables you to make repairs on both wet and dry surfaces. Use the epoxy putty stick on metal,

• UPC: 16627432
• Model: 8277
• Color: NOT STATEDOther
• Size: Adhesives: Epoxy
• Rating: 3.111

JB Kwik Cold Weld Epoxy 8276 JB Kwik?

J-B Kwik Cold Weld Epoxy sets in four minutes and fully cures in four hours. This item will adhere to all surfaces, and, once cured, can be painted, drilled and

• UPC: 16494341
• Model: 8276
• Color: Multicolor
• Size: (2) 1 oz
• Rating: 4.0

J B Weld Jb Weld Steel Stick Epoxy Putty Stick

Make a variety of repairs around the home and elsewhere with this Steel Reinforced Epoxy Putty. It creates a tight, permanent bond and sets within five minutes. Use this J-B Weld epoxy putty on bronze,

• UPC: 137106331
• Model: 8267H
• Color: GrayDark Grey
• Size: 2 oz
• Rating: 3.667

JB Weld 50133 Plastic Bonder 25 Ml.

Buy JB Weld 50133 Plastic Bonder 25 Ml. with an everyday low price and fast shipping! JB Tool

• UPC: 48806841
• Model: 50133
• Color: Multicolor
• Rating: 5.0

J-B Weld 50112 ClearWeld Epoxy Adhesive, Clear

J-B Weld ClearWeld uses a quick-setting, ultra clear formula. It will adhere to metal, wood, most plastics, glass, ceramic, tile, cement and more. The Mixing tray and stick make mixing simple, and replaceable cap allows

• UPC: 23848096
• Model: 50112
• Color: Clear
• Size: Adhesives: Super Glue
• Rating: 3.0

J-B Weld 50139 Plastic Bonder Paste Adhesive, .85 Oz

PlasticBonder is a quick-setting, two-part, urethane adhesive system that provide strong & lasting repair & works on thermoset, carbon fiber composites, thermoplastics, coated metals, concrete &

• UPC: 168950018
• Model: 50139
• Color: Multicolor
• Size: 2 Pack
• Rating: 5.0

J-B WELD 8257 1 oz. Kwikwood Epoxy Putty Stick

Repair and rebuild anything made of wood. Sets in 15 to 25

• UPC: 21284550
• Model: 8257
• Color: TanBeige
• Size: Wood Repair
• Rating: 4.0

JB Weld 8281 Steel Reinforced Epoxy Pro Size (2) 5 Oz. Twin Tubes

JB Weld 8281 Steel Reinforced Epoxy Pro Size (2) 5 Oz. Twin

• UPC: 388134926
• Model: MODB014OVHAOY
• Color: Multicolor

J-B Weld® J-B Weld™ Dark Grey Steel Reinforced Epoxy .85 fl. oz. Carded Pack

Take care of any sticky situation in your home with this versatile Steel Reinforced Epoxy by J-B Weld. This multi-purpose adhesive can be used in a variety of heavy-duty situations such as automotive use, plumbing

• UPC: 49019703
• Model: 50165
• Color: Multicolor
• Size: 0.85 oz0.85 fl oz
• Rating: 3.333