Airborne Scope Mount is 20 percent Lighter than our standard steel mount. Precision mil-spec picatinny rail and see-thru U-channel for iron sight use with scope/rings attached Rail hardened to 45-50 Rc for a tough and strong mounting platform. Produced from solid chrome-moly steel bar, not investment cast 5 degree case deflector angle milled on the underside of rail. Proven Brookfield type 3-point contact design. Includes all mounting hardware, fasteners, hex wrenches and detailed instructions Weight 9.0 ounce.
This sturdy aluminum mount provides a Picatinny-Style rail above the receiver of the M1A. The 4th generation mount features 3 points of contact with the receiver. Includes all mounting hardware and instruction.
The Aluminum Scope Mount weighs 4.3 oz (122.3 g) and is 5-7⁄16" (13.8cm) long, 1-3/4" (4.4cm) wide, 2-2/8" (6.03cm) high. Precision milled, using USA made 6061 heat-treat aerospace aluminum alloy and then put through a rigorous multiple point final inspection process to insure a quality fit and function prior to finishing with a black hard-coat anodize.
M1SURPLUS Scope Mount Rail - Low Profile Design - Durable Aluminum Material - Anodized matte black finish - Fits most Springfield M1A Rifles - Does "NOT" fit M14 rifles - Installation will require filling and fitting procedures on the mount - Installation instructions included - Gunsmith Installation recommended
The Steel Scope Mount weighs 11.1 oz. (315.1 g) and is precision milled using USA made 4142 chrome-moly bar stock with a hardness of 28-32 RC. It is put through a rigorous multiple point final inspection process to insure a quality fit and function prior to finishing - with a manganese phosphate finish. Each mount comes with all mounting hardware, fasteners, hex wrenches, and detailed instructions.
The GG&G maa Scout scope mount easily installs in the cut out of the upper factory hand guard. The overall design provides smooth integrated appearance. Specifically designed for the maa "Scout squad" or "so com 16", with cutout factory top hand guard.
Springfield 1 Piece Base Matte 4th Generation M1A MA5028. Note: Please check your state regulations, hunting regulations, etc before placing an order for any of our items. Your order may be canceled if the item is not able to be shipped to your state due to their regulations.
Since its introduction to the marketplace in 1989, this foundation has maintained its reputation as being the best mounting systems for the M21/14 Rifle. The A.R.M.S.® #18 offers interchangeability of Day & Night Vision, with an ultra low profile and the A.R.M.S., SWAN ® aka Mil-Std. 1913 Rail. Made of 8620 case hardened steel. Precision fit to the base integral with the receiver. Two attaching points plus a third contact point for ultimate stability.
The SADLAK M14/M1A Front Rail, Aluminum Low Profile Rail are our light weight and low cost option to the more robust steel rail. An internal nut plate is not used with these models. Dimensions are 3" Length x 3/4" Width x .5" Height. The Aluminum Rail is attached with two internal screws and special washers, while still retaining your stock sling swivel.The SADLAK Front Rail Mounting System is designed for clamp-on type bi-pods and accessories with an optional QD Post to attach Harris bi-pods while retaining your stock sling swivel. Steel Models uses unique internal Oval Nut plates specificall... [Read More]
This low-profile "See-Thru" Scope Mount is designed to fit Springfield .308 rifles like SOCOM 16, M14/M1A. Measuring over 6", its Picatinny/Weaver compatible top rail has a total of 15 slots. Mount screw with built-in washer included.
M1Surplus Optics Kit For Springfield M1A Rifles ! - ( SCOPE FEATURES ) One piece anodized aluminum main tube * Multi Coated Lenses * Four times Zoom Range * Quick Focus eyepiece * Reticles features an illumination function with multiple brightness setting to enhance target acquisition * Target style adjustment knobs with turret caps * Includes one inch aluminum weaver style rings, lens caps, and an extra battery SPECIFICATIONS: * MAGNIFICATION: 8X-32X * TUBE DIA. 1 inch * OBJECTIVE DIA. (MM) 50.00 * FOV: (FEET AT 100 YARDS) 12.56-3.66 * EYE RELIEF: 84mm-89mm * EXIT PUPIL(MM) 6.25-1.56 * RETICL... [Read More]
It was inspired by the Brookfield Precision Tool special production run of light weight steel mounts for the special forces in the 1980'sWe had been loaned an originalBrookfield Light-weight mount several weeks before the 101st
The most rugged, most foolproof scope mount ever designed for the 1911 Auto. Attaches to the dust cover; places the scope forward, over the top of the slide for improved balance and faster sight or
Two-piece system, these all-steel bases provide recoil resistance and feature the dovetail locking system for an ultra-secure, positive lock-on rings. Includes Torx screws and wrench for no-slip, no-strip, easy
Two piece mounts machined of Billit 6061T6 Aluminum and uses grade 8 hardened steel screws. No moving parts between firearm and scope. Fast installation and requires no special tools. Eliminates need for windage screws. Two
© 10Toply.com - all rights reserved - Sitemap 10Toply.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com