Throat Diameter: 1" Type: Screw-On Nominal Impedance: 8Ω Rated Power Handling: 75 Watts Each Driver Program Power: 150 Watts Each Driver Sensitivity (1W/1m): 107 dB Frequency Range at -10 dB: 400 - 8,000 Hz Recommended Hi Pass X-Over: 500 Hz (12 dB/Octave) Voice Coil Diameter: 2" Magnet Material: Ferrite Diaphragm Type: Phenolic Weight: 3.11 Lbs
BEHRINGER F1220D Bi-Amped 250-Watt Monitor Speaker System with 12" Woofer, 3" Tweeter and Feedback Filter
2 Speakers Exit Throat Diameter 1" (25.4mm) Nominal impedance 8 Ohms Rated Power Handling 90 Watts Each Speaker Program Power 180 Watts Each Speaker Sensitivity 2.83V at 1m109 dB Recommended Hi Pass Crossover** **For Full Power Handling 1000 Hz** **12db Per Octave Crossover Frequency Response at -10dB 650 - 19,000 Hz Voice Coil Diameter 1.75″ (44.4 mm) Voice Coil WireCopper Voice Coil Former Material Kapton Diaphragm Material Polyimide Flux Density 1.85 T Magnet MaterialFerrite Overall Depth 6.85" (174 mm) Mounting Depth 6.48" (164.5 mm) Overall Width 6.10" (154.7 mm) Overall Height 6.10" (1... [Read More]
The WG320Ti is PRV's solution for mid-high vocal reproduction that offers high sensitivity and a pleasant sound from the titanium diaphragm. The square horn allows easy and convenient mounting.
*Sold as each not in pairs. *F1 horn not included.* The Massive Audio PAT 250 Series Full Range 1 3/8 € Exit Screw-on power mid-range drivers. These driver provides very high pressure levels with low distortion for better control from 70 watts RMS to 200 Watts Peak. Each driver is designed for serious music enthusiasts and will enhance any Car or Pro Audio applications that you have in mind. With a frequency range of 200Hz €" 6Khz you will be sure to hear all the subtleties your music requires. Use in combination with our F3 or F1 AVS Horns and M Series Drivers for a big stadium On-Stage... [Read More]
250 watts RMS/500 watts peak power. Frequency response: 1.5k-20kHz. 8 ohm impedence. Fits horns with 1 3/8" x 18 TPI threads.
Engineered and designed in the USA by Skar Audio engineers, the PD1-X 200 Watt 1-inch high-efficiency compression horn driver is unmatched in performance and sound reproduction. Sold individually, this driver is designed for medium band reproduction and is recommended for midrange applications in SPL car audio systems or in small PA systems. The PD1-X features a universal 1-⅜" screw-on connection, allowing a horn to easily be added. The smooth response and the accuracy of the high frequencies reproduced by this driver are unparalleled, making it the top choice among audio enthusiasts.Outer D... [Read More]
Pair of Titanium Compression Horn Drivers Model #: T-Driver (2 Pack). Pair of Titanium Compression Horn Drivers. 15 oz Magnet with 1 3/8" voice coil. 100 Watts RMS, 200 Watts Peak each. Impedance: 8 Ohms. Frequency response: 1.5k to 20k. Sensitivity: 102 db. Fits Horns with a 1 3/8" Thread. Weight: 1.1 lbs each. Condition: NEW. One year warrantyThe Seismic Audio T Driver is a Titanium Compression Horn that is ideal for replacing old drivers or upgrading to a more higher end horn driver. The T Driver will give you the crisp clean highs you desire with a frequency response of 1.5K - 20K and 100 ... [Read More]
Features: Peavey RX14 1.4" High Frequency Drivers Throat Parameter: .938" / 23.8 mm Nominal Impedance: 8 Ohms Minimum Impedance: 7.1 Ohms DC Resistance: 6.8 Ohms Power Capacity 1000 Hz to 20,000 Hz: 120 W peak60 W program30 W continuous Sensitivity: 104 dB SPL 1 Watt at 1 meter On-axis on 90º H x 45º V horn Nominal Efficiency: 30% Frequency Response: 1.5 kHz to 20 kHz Recommended Crossover: 1,800 Hz at 12 dB / Octave Lowest Recommended Crossover: 2,000 Hz at 12 dB / Octave Diaphragm: Commercially pure titanium Voice Coil Diameter: 1.4" / 34.4 mm Voice Coil Material: Edge-wound ribbon with h... [Read More]
2″ Exit Aluminum Horn + Ferrite Driver 400 Watts Continuous Power Each Driver 200 Watts RMS Power Each Driver Impedance: 8 Ohms Sensitivity: 109 dB Frequency Response: 1.0KHz - 20KHz 2″ Titanium Voice Coil Weight: 7.20 Lbs Mounting Depth: 5.75″ (146 mm)
Best Way Tools 4-In-1 Replacement Double-End Screwdriver Bit - Double ended replacement screwdriving bits for Best Way 4-in-1 screwdrivers model - Type End 1: Phillips, Size End 1: #2, Type End 2: Slotted, Size End
Best Way Tools 6-In-1 Replacement Double-End Screwdriver Bit - Double-ended replacement screwdriving bits. - Type End 1: Phillips #1x3/16" Slotted, Type End 2: Phillips #2x9/16" Slotted, Pkg Qty: 1, Package Type: Card Warning: This product
Best Way Tools 6-in-1 Flowered Multi-Bit Screwdriver - Flowered pattern handle with double-ended chrome-plated tube. Quick-change bits of - Type: Phillips, Slotted, Nutdriver, Bit Retainer Type: Quick Change, Warning: This product can expose you to
The Sound Town MHF-014 is a high-quality compression driver, compatible with the Sound Town METIS series speakers and speaker cabinets of any other brands which require 1” tweeter. The compression driver comes with 12-oz magnet
© 10Toply.com - all rights reserved - Sitemap 10Toply.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com