Best 1s Lipo Charger - May 2024

Tenergy TB6-B Balance Charger Discharger 1S-6S Digital Battery Pack Charger for NiMH/NiCD/Li-PO/Li-Fe Packs w/ LCD Display Hobby Battery Charger w/ Tamiya/JST/EC3/HiTec/Deans Connectors + Power Supply

* NiMH/NiCD 1~15 cells ( 1.2v to 18v) * Li-PO/Lithium Ion 1~6 series ( 3.7v to 22.2v) * Li-Fe 1~6 series * Sealed Lead Acid (SLA) * Charge your NiMH/NiCD Receiver Packs: 3.6v, 4.8v, 6v, or 9.6v * Charge your LiFE Packs: 6.6v * Charge your normal NiMH/NICD Packs: 7.2v, 8.4v, 9.6v, 10.8v, 12v * Charge your High Performance LIPO Packs: 7.4v, 11.1v, 14.8v, 18.5v * Charge your Airsoft NiMH/NICD Packs: 8.4v, 9.6v, 12v * Charge your Airsoft LIPO/LiFe Packs Future proof yourself for any new battery pack or upgrades, instead of having constantly buy 1 charger for each type of pack. Note: to charge Mini... [Read More]

• ASIN: B00466PKE0
• UPC: 793631761166
• ASIN: B00466PKE0
• Brand: Tenergy
• Manufacturer: Tenergy

Upgrade 1S LiPo Battery USB 3.8V/4.35V Charger 6 Channel 1S LiHV Charger for EMAX Tinyhawk Blade Inductrix Tiny Whoop Inductrix FPV Plus Battery Micro JST 1.25 JST-PH 2.0 mCX mCPX Connectors

1S LiPo Battery USB Charger 3.8V/4.35V 6 Channel 1S LiHV Charger Tiny Whoop Blade Inductrix Micro JST 1.25 JST-PH 2.0 mCX mCPX ConnectorsSpecifications:ONLY support LiHV 3.8V/4.35V 1S battery, not for 4.20V 1S LiPo batterySupport 0.2A/0.6A charge current by switch buttonUSB power supply interface input range: 5V plusmn;5% on 0.5~2A, suggested 2.4ACharger plug: Micro 1.25 and JST-PH 2.0The 6 LED lights indicate the charging state of the six channels independently, LED solid indicates charging, LED off indicates full charged.Battery charging termination voltage:Li-HV type 4.35V plusmn;0.5%Produc... [Read More]

• ASIN: B074M6G2MD
• UPC: 190657905855
• ASIN: B074M6G2MD
• Brand: Crazepony
• Size: XXS
• Manufacturer: Crazepony

1S LiPo Battery USB Charger 3.7V/4.20V 6 Channel 1S LiPo Charger Tiny Whoop Blade Inductrix Micro JST 1.25 JST-PH 2.0 mCX mCPX Connectors

1S LiPo Battery USB Charger 3.7V/4.20V 6 Channel 1S LiPo Charger Tiny Whoop Blade Inductrix Micro JST 1.25 JST-PH 2.0 mCX mCPX ConnectorsSpecifications:USB standard power supply interface, simple operation, plug and playONLY support LiPo 3.7V/4.20V 1S batterySupport 0.2A/0.6A charge current by switch buttonUSB power supply interface input range: 5V plusmn;5% on 0.5~2A, suggested 2.4ACharger plug: Micro 1.25 and JST-PH 2.0The 6 LED lights indicate the charging state of the six channels independently, LED solid indicates charging, LED off indicates full charged.Battery charging termination volta... [Read More]

• ASIN: B074M77J5M
• UPC: 190657905633
• ASIN: B074M77J5M
• Brand: Crazepony
• Size: XXS
• Manufacturer: Crazepony

UP-S6 1S LiPo Battery Charger LiPo/LiHV Charger for Blade Inductrix Tiny Whoop mCX mCPX Micro Losi Connector

Specifications:DC input voltage：9.0V-15.0VCharge power：Max.4.35Wx6,±10%Charge current：(0.1-1.0A)x6.±10%Battery type：LiPo/LiHVBattery cell count：1cellIndication：LED lightSupport battery port：Micro. MX, mCPXSupport USB charge port：5V/2.1ANet weight：70gDimension：100x50x22mmCharger SettingUP-S6 support current setting and battery type setting. Short press button to activate current setting mode and long press the button to activate battery type setting. Both setting can be activated even during charging.Package Including1 * UP-S6 1S LiPo Battery Charger1 * UP-S6 Instruction M... [Read More]

• ASIN: B0757JK2YS
• UPC: 190033968337
• ASIN: B0757JK2YS
• Brand: Crazepony
• Size: 1S
• Manufacturer: Crazepony

EYESKY LiPo Charger 1S-6S Digital Battery Balance Discharger 80W 6A for Li-ion Life NiCd NiMH LiHV PB Smart Battery ... (qa)

ECB6 LiPo Balance Charger is one of the most popular battery pack chargers on the market. It is capable of charging a large number of battery types and voltages, intending to help eliminate your need of having multiple and different chargers for all of your hobby RC or airsoft batteries. This convenient charger package comes with an octopus multi-charging harness (connectors: tamiya, mini tamiya, JST, HiTec, EC3, Deans), alligator clips, Fireproof battery bag, Lipo battery voltage tester and the power supply all in 1 comprehensive package. WIDE VOLTAGE COMPATIBILITY NiMH/NiCd 1.2V-18V (1A... [Read More]

• ASIN: B07RK13XNQ
• UPC: 715802791499
• ASIN: B07RK13XNQ
• Brand: EYESKY
• Manufacturer: EYESKY

Venom Pro Quad Micro 1S 4 Channel AC/DC LiPo & LiHV Battery Charger

Venom is proud to introduce the latest member of the wildly successful Pro Charger Series.The Venom Pro Quad Micro 1S Charger was designed for the next generation of micro flyers.This little powerhouse boasts a sleek case design with a silky smooth rubberized texture, features an integrated power supply and 4 independent charge circuits for simultaneous charging up to four 1S batteries.Each charge port features a LED status indicator and four popular connectors including: mCX (Picoblade 1.25mm), mCPX (JST-PH 2.0), JST, and Molex. The clear, easy to read LCD screen displays current and battery ... [Read More]

• ASIN: B071K7ZNSZ
• UPC: 841850112143
• ASIN: B071K7ZNSZ
• Brand: Venom
• Manufacturer: Venom Group International

LiPo Charger Balance Discharger 1S-6S Digital Battery Pack Charger for NiMH/NiCD/Li-Fe Packs w/LCD Display Hobby Battery Charger w/Tamiya/JST/EC3/HiTec/Deans Connectors + Power Supply

HTRC 80W 6A DC Lipo Charger / Discharger with Convenient Multifunction A Charger, Multifunction Convenient Features： -Microprocessor controlled Delta-peak sensitivity. -High-Power and high-performance circuit. -Automatically identify the cells counts of lithium battery section. -Check lithium battery internal resistance.Let you know when a cell is going bad. -Support LiHV battery. -Support smart battery I,II,III.(need optional smart battery charging cable). -Maximum Safety: Low Input Voltage setting,Delta-peak sensitivity. Capacity limit,  processing time limit, Temperature Threshold. -Term... [Read More]

• ASIN: B07H899K7Y
• UPC: 732025961119
• ASIN: B07H899K7Y
• Brand: HTRC
• Manufacturer: HuiTuo

BETAFPV 1s Lipo LiHV Charger Board with XT60 12A 3V Battery Charger Adapter

This charger makes field charging your model plane, drone, or quadcopter easy! Just take any 3s or 4s lipo with an XT60 connector and plug it in to this charger and charge dozens of 1s packs. You could also use a wall adapter as supply power so you can continuously charge at home. Once supplied with a 3s or 4s battery, just plug your 1s batteries into the charger to start charging. When you connect a discharged 1s battery to the charger the corresponding ports LED light will turn red until the battery is fully charged. Once charged, the LED will turn green and you can remove your 1s battery an... [Read More]

• ASIN: B072BXBSX5
• ASIN: B072BXBSX5
• Brand: BETAFPV
• Manufacturer: BETAFPV

Upgraded 1S LiPo LiHV Charger Board for Blade Inductrix Tiny Whoop Micro JST 1.25 and JST-PH 2.0 1S LiPo Battery with JST and Micro Losi Cable

New version with Upgraded Cover for protecting board!This charger makes field charging your model plane, drone, or quadcopter easy! Just take any 2s 3s or 4s lipo with an XT60 connector and plug it in to this charger and charge dozens of 1s packs. You could also use a wall adapter as supply power so you can continuously charge at home. Once supplied with a 3s or 4s battery, just plug your 1s batteries into the charger port to start charging. When you connect a discharged 1s battery to the charger the corresponding ports LED light will turn solid until the battery is fully charged. Once charged... [Read More]

• ASIN: B07CJ5ZJ1V
• UPC: 192684016160
• ASIN: B07CJ5ZJ1V
• Brand: Crazepony
• Size: 6 ports-200mA/600mA
• Manufacturer: Crazepony

1S LiPo LiHV Charger Board with JST and Micro Losi Cable for Blade Inductrix and Tiny Whoop

1S LiPo LiHV Charger Board with JST and Micro Losi CableThis charger makes field charging your model plane, drone, or quadcopter easy! Just take any 3s or 4s lipo with an XT60 connector and plug it in to this charger and charge dozens of 1s packs. You could also use a wall adapter as supply power so you can continuously charge at home. Once supplied with a 3s or 4s battery, just plug your 1s batteries into the charger port to start charging. When you connect a discharged 1s battery to the charger the corresponding ports LED light will turn solid until the battery is fully charged. Once charged... [Read More]

• ASIN: B07FSH6TPQ
• UPC: 673400127723
• ASIN: B07FSH6TPQ
• Brand: Crazepony
• Size: small
• Manufacturer: Crazepony

2pcs CX405 1S LiPo Battery USB Charger 4.2V 4.35V LiPo LiHV JST-PH 2.0 mCPX Connectors Tiny Whoop

2pcs CX405 1S LiPo Battery USB Charger 4.2V 4.35V LiPo LiHV JST-PH 2.0 mCPX Connectors Tiny Whoop NOTE: pls plug into power supply first, and puncture the hole,then the charger will change charging modes.Features:USB standard power supply interface, simple operation, plug and playFour channels independent charging output, can charge four batteries simultaneouslySupport switch LiPo (3.7/4.20V) /Li-Hv (3.8/4.35V) by pressing buttonThe 4 LED lights indicate the charging state of the four channels independently, LED flashing indicates charging, LED solid indicates full chargedIntelligent scanning ... [Read More]

• ASIN: B073B7Z7Y3
• UPC: 190033646112
• ASIN: B073B7Z7Y3
• Brand: Crazepony
• Size: 1
• Manufacturer: Crazepony

1S LiPo Battery Charger 6-in-1 Intelligent 1S Charger LCD Display Digital Battery Capacity Checker Quick Charge for LiPo/LiHV with Micro MX mCPX JST Connector

1S LiPo Battery Charger 6-in-1 Intelligent 1S Charger LCD Display Digital Battery Capacity Checker Quick Charge for LiPo/LiHV With Micro MX mCPX JST ConnectorSpecifications:Input Voltage: DC 6.0V-20.0VUSB Output：QC3.0 Battery Output：4.35V X6Charger Power: Max.4.35WX6Charger Current: (0.1-1.0A)X6Battery Type: Lipo/LiHV Battery Cell count: 1 CellIndication:1.8 inch color Screen Support Battery Port: MCX/JST/Mcpx/MOLEXCharging Accuracy: up to ±0.01VProduct Weight: 100gGross Weight: 120gProduct Size: 83X62X23mmPacking Size: 88X67X28mm

• ASIN: B07LGVKXXH
• ASIN: B07LGVKXXH
• Brand: Crazepony
• Size: small
• Manufacturer: Crazepony

Crazepony 1S LiPo Battery Charging Board Blade Inductrix Ultra Micro JST-PH Parallel Connect Plate mCX mCPX

Crazepony 1S Lipo Battery Charging Board Blade Inductrix Ultra Micro JST-PH Parallel Connect Plate Specifications:Input Charge Connector: Male 4mm Banana PlugOutput Connector: 6x Micro JST 1.25; 6x JST-PH 2.0Wire Type: 18 AWG Charge LeadMax Charge Rating: 1.5A per batteryFuse Rating: 1.5ABoard size: 62.5x32x5mmWeight: 17gIt needs to connect to A LiPo charger for charging batterySuitable for battery of Blade Inductrix, Glimpse, mCP X, Nano QX 3D, Nano CP X, Nano QX etc*Micro JST 1.25 AKA Ultra Micro JST, mCX, Pico, Molex 1.25 etc.*JST-PH 2.0 AKA High Current Ultra Micro, mCPX, Powerwhoop etc.Pa... [Read More]

• ASIN: B01ID6U4LC
• UPC: 190033047995
• ASIN: B01ID6U4LC
• Brand: Crazepony
• Size: Small
• Manufacturer: Crazepony

E-flite 1S USB Li-Po Charger 300mA

Key Features Charges most 1S batteries using E-flite ultra micro connector Covenient-use anywhere a powered USB port is available Works with a USB computer port, USB car charger adapter, or a USB AC power charger adapter DC Input: 5.0V 350mA DC Output: 4.2V 300mA

• ASIN: B00DDTL5T0
• UPC: 605482096505
• ASIN: B00DDTL5T0
• Brand: E-flite
• Manufacturer: Horizon Hobby

HELIFAR Balance Battery Chager 1S LiPO/LiHV for RC DC Adapter 6 Ports and JST Extension Cables Compatible with Micro/Micro JST 1.25/ JST-PH 2.0/ JST Plug(Black)

Charger Features: DC Input Voltage: 9-15V Power: max. 4.35W X 6, plus or minus 10% error Current: (0.1-1A) X 6, plus or minus 10% error Battery Type: LiPo/LiHV Battery Section: 1S Indicator: LED light Supports Battery Ports: Micro/MICROF, MX/Micro JST 1.25/mC, mCPX/JST-PH 2.0/Powerwhoop, JST plug Support USB Charging Port: 5V/2.1A Net weight: 70g Size: 100x50x22mm Power Adapter Features: Voltage: AC 100-240V Output Voltage: DC 12V Output Current: DC 3A MAX Max. Output Power: 36W MAX Output Over-current Protection: Yes Working Temp: 0-40℃ Operating Humidity: 0-80% Storage Temp: -20-60℃ Stor... [Read More]

• ASIN: B07C2RPRYQ
• UPC: 191438019662
• ASIN: B07C2RPRYQ
• Brand: HELIFAR
• Manufacturer: HELIFAR

Cheerwing 3.7V 550mAh Lipo Battery (4PCS) with 4 In 1 Battery Charger for Syma X5SW X5 X5C X5C-1 RC Quadcopter Drone Parts

Description:Syma X5 X5C Quadcopter Parts20C 3.7V 550mAh Lipo BatteryCharger Voltage input: DC 5V; Voltage output: 4.2V ± 5%Charging 4 battery at one time, Over charge protection Package Include: 4pcs x Lipo Battery 1pcs x

• UPC: 673278447
• Color: White
• Rating: 2.0

B3 PRO 20W 2S 3S Compact Balance Charger for LiFe Lipo Battery RC Quadcopter Car

Please note, this item ships from an international seller. Expected delivery is 10-15 days. International ShippingB3 PRO 20W balance power charger is able to be used for many types of Life Lipo batteries of RC

• UPC: 162190277
• Color: Black

iMAX B6 AC Digital LCD Balance Charger Power Adapter for RC Li-ion Lipo LiFe NiMh NiCD Battery + Cables

Specifications:Input Voltage: 11-18vCircuit power: Max Charge: 50W / Max Discharge: 5WCharge Current Range: .1-5.0ADischarge current range: .1-1.0ANi-MH/NiCd cells: 1-15Li-ion/Poly cells: 1-6Pb battery voltage: 2-20vDimensions: 133x87x33mmPackage Included:1 x Balance Charger3 x Cables1 x InstructionManualFeatures:Microprocessor controlledDelta-peak sensitivityIndividual

• UPC: 614423893

Original GoolRC B3 100-240V AC 2S 3S Compact Charger for RC Quadcopter RC Car Lipo Battery

Please note, this item ships from an international seller. Expected delivery is 10-15 days. International ShippingGoolRC B3 Battery Balance Power Compact Charger is able to be used for many types of Lipo Batteries of RC quadcopters,

• UPC: 803571777
• Color: Black

HobbyFlip Battery Auto Shut-Off Charger LiPo 2S 3S 7.4v-11.1v 05#4-Z-23 GA005 Compatible with Walkera QR X350

Battery Auto Shut-Off Charger LiPo 2S 3S

• UPC: 661216426

HobbyFlip 3.7v 350mAh 25c Lipo Battery Dual Charger Propeller Props Compatible with Holy Stone HS170 Predator

3.7v 350mAh 25c Lipo Battery Dual Charger Propeller

• UPC: 157458731

Mosunx 6 In 1 3.7V 1S LiHV Lipo Battery Charger Board with JST and Micro Losi Cable

6 In 1 3.7V 1S LiHV Lipo BatteryCharger Board with JST and Micro Losi CableDescription:This charger makes field charging your model plane, drone, or quadcopter easy!Just take any 3s or 4s lipo with an XT60

• UPC: 612331676

Ultra Power UP-S6 3.7V 1S Lipo LiHv Battery Charger with MICRO MX mCPX USB Port for Blade Inductrix RC Racing Drone Quadcopter

Please note, this item ships from an international seller. Expected delivery is 10-15 days. International ShippingUP-S6 employs the circuit that features 6 totally independent but identical power outputs which are powered 4.35W each. It's designed for

• UPC: 850446444
• Color: Black

iMAX B6 AC Digital LCD Balance Charger Power Adapter for RC Li-ion Lipo LiFe NiMh NiCD Battery + Cables

Data storage (Store up to 5 packs in

• UPC: 629993698
• Color: Other

Yuneec USA SC35003 SC35003 3S 11.1V 3.5A DC LiPo Balancing Charger

Yuneec USA SC35003 SC35003 3S 11.1V 3.5A DC LiPo Balancing

• UPC: 50742065
• Model: SC35003
• Color: White

BEST OFFER E-Flite Blade Celectra 4-Port 1S DC Li-Po Charger : mCP S mCX / mCX2

• UPC: 273764812475
• Category: Other RC Parts & Accs
• Price: 50 CAD