High performance, omnidirectional antenna for receiving 1090 MHz Mode S and ADS-B data from aircraft. The antenna can be used outdoors, mounted on a mast that is 2.5 cm to 4 cm in diameter, or installed indoors against a window. When properly installed without obstructions, the antenna can receive ADS-B data from aircraft up to 250 mi / 400 km away. Mounting bracket and U-bolts included. Compatible with all ADS-B receivers including FlightFeeder, PiAware, Mode S Beast, Radarcape, Kinetic SBS1/SBS3, RTL Dongles, and more.
A pair of 5dBi, medium-sized, lightweight antennas with 978MHz and 1090MHz center frequencies, respectively, designed for portable ADS-B applications. Also included are a pair of 15cm (6") male MCX to female SMA pigtail cables, made from RG316 cable for low loss. As such, these antennas can be used with MCX-input or SMA-input devices without further purchase. Each antenna is only 20g and 19cm (7.5") long, 5dBi, with a VSWR of 1.5:1 or better at their respective center frequencies. A handy flexible antenna elbow facilitates a wide range of mounting options.
Stratux dual band ADS-B receiver transforms your tablet into the ultimate flight tool with external GPS puck for Wide Area Augmentation (WAAS) GPS, subscription-free ADS-B weather and air-to-air traffic. WAAS GPS provides accurate information coordinates within +/- 2.5m. It includes embedded AHRS chip supporting ForeFlight Synthetic Vision and other EFBs. AHRS stands for Attitude and Heading Reference System. This provides true yaw, pitch, and roll information to your favorite EFB. Introduced more than a decade ago by the FAA, ADS-B (Automatic Dependent Surveillance-Broadcast) provides weather... [Read More]
High performance, omnidirectional antenna for receiving 978 MHz UAT data from aircraft. The antenna can be used outdoors, mounted on a mast that is 2.5 cm to 4 cm in diameter, or installed indoors against a window. Mounting bracket and U-bolts included. Compatible with dump978 software.
1090MHz Mode S filter with SMA (female to male) connectors. Designed to reduce interference and significantly improve valid aircraft transponder message rate of ADS-B/Mode S receivers. Passes range 980MHz - 1150MHz. Impedance is 50ohms and insertion loss is
Description: Frequency Range(MHz) 1090 Cable Type: RG174 Max Gain(dBi) 2.5 Max Input power(W) 50 Input Impedance(Ω) 50 Polarization Type Vertical Base diamter: 3cm Cable length: 1 Meter Package including : 1 piece Antenna+ 1 piece MCX Female to SMA male adapter
A pair of small, lightweight antennas with 978MHz and 1090MHz center frequencies, respectively, designed for portable ADS-B applications. Also included are a pair of 15cm (6") male MCX to female SMA pigtail cables, made from RG316 cable for low loss. As such, these antennas can be used with MCX-input or SMA-input devices without further purchase. Each antenna is only 9g and 11cm (4.25") long, 3dBi, with a VSWR @ 978MHz of 2:1 or better. A handy flexible antenna elbow facilitates a wide range of mounting options.
Omni Antenna fully optimized for long and short range ADS-B reception. It contains a 10 meter cable and SMA connector. Compatible with any AirNav RadarBox ADS-B receiver and with other suitable SMA connector receivers. It is used by thousands of RadarBox ADS-B sharing sensors in over 150 countries worldwide.
This dual-band SDR bundle contains everything you need for a full DIY ADS-B installation. 2 NESDR Nano 2 SDRs are included. These SDRs contain an R820T2 tuner along with an RTL2832U USB interface/demodulator. They have a frequency capability of approximately 25MHz-1700MHz. The NESDR Nano 2 are very small in size, which makes them perfect for portable and embedded applications. Each SDR is lab-calibrated and serialized for easy Stratux software installation. Each comes with a calibration certificate with the calibration value & serial number, along with a pair of adhesive labels which you can a... [Read More]
Includes: 1 (One) Raspberry 3 Model B +ADS-B 1090MHz PRO USB STICK + Band-pass SMA Filter with pigtail plus 5dBi Antenna + Cable for FlightAware. This is a perfect House Station kit for your FlighAware system. Raspberry 3 Model B Comes with pre loaded micoSD card with PiAware, all you have to do is Claim your device and you are ready (must register an account with FlightAware, internet connection is required). You can claim your device using provided Cat5 cable or you can enable WiFi (keyboard and mouse will be required - NOT INCLUDED). SMA (female to male) 1090MHz Mode S filter. Designed t... [Read More]
Revolutionary high-performance RTL Dongle ADS-B/MLAT receiver with built-in self-powered amp, compatible with FlightAware PiAware. The Pro Stick dramatically improved range over other RTLSDR USB receivers.
A pair of 5dBi, medium-sized, lightweight antennas with 978MHz and 1090MHz center frequencies, respectively, designed for portable ADS-B applications. Each antenna is only 20g and 19cm (7.5") long, 5dBi, with a VSWR of 1.5:1 or better at their respective center frequencies. A handy flexible antenna elbow facilitates a wide range of mounting options.
Specifications: Gain: 5dBi; Frequency Range: 100MHz-1766MHz; Compatible with: RTL SDR Software Defined Radio SDR ADS-B Receiver USB Stick Dongle Tuner; Feature: Magnetic Base Mounting; VSWR: < 2.0; Impedance: 50 ohm; Direction: Omni-directional; Antenna Cable: 3 Meter RG174 Coaxial Cable; Cable Connector: SMA Male Connector; Accessoried Adapter: MCX Plug Connector Adapter; Net Weight: 68g; Operating Temperature: -20°С ~ +80°С Storage Temperature: -30°С ~ +85°С Package List: 1 x Antenna (As the Picture Shown);
Cut The Cable Now & Enjoy Free TV Show With Your FamilyFREE HD Program for Life Never pay expensive cable or satellite fees again! Our HDTV Antenna can get access to your local news, weather,
Best Choice Product presents this brand new HD TV Antenna. This Outdoor antenna is one of the most powerful on the market with a range of 150 miles. It's designed to receive Digital TV UHF/VHF
Built-in Low-Noise and High Gain Amplifier Built-in motor turns the antenna 360 degrees | Motor turns in both directions to avoid tangles with remote controller Control Box with Dual TV Outputs is included Assembles in
NEWEST 2019 VERSION with LATEST AMPLIFIER SIGNAL BOOSTER Indoor HDTV Antenna! At MPG, we create lasting products that help people benefit from the power of technology and make life better, easier and more fulfilling.We are
Product Description: The amplifier can make your TV antenna get more channels, improve the clarity ofthe frequency, expand the receiving range.Product Features: Simple operation, Fast & Easy Setup, Just Plug it In.No tools are needed
FSA 3806 is the best outdoor rotation antenna We carry so far. Not only its reception range could reach up to 200 mile, but also it has many other advanced features.FSA 1806 is designed to
This is our best antenna by Boostwaves on the market with solid construction and high quality material to withstand weather conditions on your roof! Amplified HD Outdoor HDTV Antenna, 360-Degree Rotation, UHF/VHF/FM Radio, Remote Control:
© 10Toply.com - all rights reserved - Sitemap 10Toply.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com