This Attwood Tsunami T800 Bilge Pump features innovative engineering and a compact design to provide the most reliable pumping performance. This powerful and reliable T800 model is rated for 800 gallons per hour (gph) output at design voltage 13.6 volts DC, or 760 gph at nominal voltage of 12 volts DC. This pump features the most advanced materials, including premium-quality bearings and state-of-the-art brushes, alloys, and magnets. The patented shaft seal prevents leaks caused by misalignment, and the caulked and tinned wiring eliminates wicking, prevents water damage, and resists corrosion.... [Read More]
The Shoreline Maine Bilge Pump Plumbing Kit comes complete with a 5’ reinforced ¾” ID bilge hose, one ¾” Thru-Hull fitting and two Stainless Steel hose clamps. The corrugated hose is segmented into 1 foot sections with a smooth area every foot. The smooth areas are meant for cutting the hose down to a shorter length for individual applications. This design allows the hose ends to fit tightly over the bilge pump outlet and the thru-hull fitting barb while the corrugated sections stop it from kinking. * MUST BE USED WITH A BILGE PUMP EQUIPED WITH A ¾” OD OUTLET BARB ONLY – VERI... [Read More]
Amarine-made automatic bilge pump -1100 gph Compact, automatic, fully submersible electric pump Built-in float switch! (No separate float switch is needed) Equipped with built in electronic controlled reed sensor system for easy fully automatic operation No power use until pump is activated by internal float switch (when water level rises) Compact, efficient, long life motor Rustproof and corrosion resistant Stainless steel shaft High-impact durable plastic housing Quick release strainer for easy maintenance Extremely efficient, very low current draw and offer high capacity output W... [Read More]
This new automatic submersible drain pump from EZ Travel Collection is capable of pumping up to 2,000 gallons of dirty water an hour! Complete with an automatic float switch shutoff feature, universal hose fitting spigot for various size drain hoses from 1" to 1.25" and a carry handle to boot; makes this pump a must have for every Hot Tub and Pond care taker. Unlike other fountain pumps on the market; this model is rated at horse power and can drain a hot tub in minutes. The pump requires little work to operate and is completely submersible, it also features an overheat prevention mechanism th... [Read More]
The Rule 360 provides outstanding quality and value. It is economically priced and designed for small boats. 3/4" (19mm) discharge outlet. 12 Volts DC unless noted.
Shoreline Marine’s 3 Position Bilge Pump Switch is an On/Off/On design. It’s meant for applications where the bilge pump is equipped with an automatic float switch and you want the ability to turn the pump on manually, turn it off completely or to leave it set in the automatic mode operating from a float switch. The pumps automatic float switch can be either a remote or a self-contained style switch. Two separate lights on the panel illuminate to indicate when either the manual or auto setting of the circuit is engaged, there is no light present when the switch is in the off position. An i... [Read More]
The Jabsco Water Puppy pump is the standard in compact, low voltage DC, self-priming, motor driven pumps. Since the Water Puppy is self-priming, it can be located above the fluid source and installed in a convenient location, mounted in any position. Able to lift water up to 4 feet, the flexible impeller can pass small solids without damaging the pump, and it delivers up to 7 GPM at open flow. It is equipped with a improved high torque motor and a new pressure cast bronze body featuring a reusable O-ring type end cover seal. Ideal for bilge pumping, bait tank circulation, livewell aeration... [Read More]
Sleek, reliable and compact unit with integrated switch ready to install for years and years of unerring service. Easy-to-install Dura-port discharge ports to eliminate stress cracking caused by over-tightened hose clamps. Includes both a straight and a 90 Degree smooth elbow Dura-Port and removable check valve. Reverse wire protected to insure correct polarity. Heavy duty motor with stainless steel shaft and tough thermoplastic body for long pump life. 6" L x 3.2" W x 4.1" H. Weight: 23.3 oz./Capacity 3' head: 700 GPH/Capacity Straight: 1000 GPH/Amperage: 3.2A/Fuse Size: 5A/Connection: 3/4".
Float Switch, MFG# JP-36152, Electro-Magnetic, 15A Max, 12V, Compact mechanical switch offers a combination of reliable solid state electronics and a sealed float switch. False start prevention, no mercury, high impact plastic & encapsulated electronics.
Automatic bilge pumps with Built-in switch. Removal of the motor cartridge allows for easy cleaning of the strainer and impeller in the event that the pump becomes clogged with debris. Electric Submersible Pumps are by far the most popular type of electric Bilge Pumps, submersibles give very high outputs, are cost effective, have low amp draw and are easy to install. Bilge pumps are designed to exhaust standing water only. They are not intended to prevent rapid accumulation of on-board water due to rough weather, hull damage, and/or other unsafe navigational conditions. Model volt Flow Current... [Read More]
600 GPH Bilge Pump provides great performance in a small package. Includes bilge pump, mounting base, and SS hardware. Pump is fully submersible and features marine grade wiring for exceptional performance.
This Attwood Sahara S1100 Automatic Bilge Pump provides reliable bilge water pumping for boats of any size. This pump meets the requirement of an automatic-switch bilge pump for any vessels 20 feet and over with sleeping accommodations. This S1100 model is high-capacity for larger boats and yachts. This pump is a compact and durable package that includes the pump, wire seals, strainer, and mercury-free switch all in one unit that installs quickly and easily in tight spaces. It mounts horizontally only. This 12-volt, 1.5-amp draw pump is rated for 1,100 GPH performance at open flow (at voltage ... [Read More]
The 12 VDC Sahara 500 Automatic Bilge Pump is ideal for your recreational boat. It comes in a compact size and its low-profile design allows for it to be put in very tight spaces, so
Protect your marine vessel from unwanted water with the Shoreline Bilge Pump. It is easy to install and features quality tinned wired ends, as well as a universal mounting base. It pumps at a rate
The Shoreline Bilge Pump moves a lot of water efficiently. With the included mounting bracket, you'll quickly install this Shoreline Marine Pump in your boat or other location that routinely needs water pumped out. The
The Tsunami 500 GPH Bilge Pump is made with the highest quality bearings, brushes, alloys and magnets. With innovative engineering and a compact design, this pump delivers high output from a small package. It features
The Tsunami Bilge Pump offers a durable, reliable and powerfully performing 12VDC unit suitable for use in recreational boating vehicles, making it an excellent choice for the avid boating enthusiast. This bilge pump is crafted
The Shoreline Bilge Pump Float Switch is designed to work with most 12V bilge pumps. Features of this white Bilge Float Switch include an automatic lever type switch with tinned marine-grade wire. This automatic float
Features: - Durable plastic housing, rust resistant- The strainer base is easy to access for cleaning and maintenance- Universal mounting hole for quick installation- Ideal for fishing boats, cruise ship, yachts, etc.Specifications: * Flow Rate:
© 10Toply.com - all rights reserved - Sitemap 10Toply.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com