• Stage 2 Boost Cooler Forced Induction Progressive Water-Methanol Injection Kit (Red High Temp Nylon Tubing, Quick-Connect Fittings)

    Innovative engineering, extensive field testing. Exceptional quality control. Provides longer brake life and performance. Easy installation, direct fit, perfect replacement. Offering the quality, reliability, and durability

    • ASIN: B079HBZ7T8
    • UPC: 608067063121
    • ASIN: B079HBZ7T8
    • Brand: Snow Performance
    • Manufacturer: Snow Performance

  • Snow Performance 310 Water/Methanol Injection Kit (Stage 3 Gasoline The New Boost Cooler)

    Snow Performance 310 Stage 3 Boost/EFI Boost Cooler The Snow Performance Stage 3 Boost Cooler is the most advanced water-methanol injection system for your EFI (electronic fuel injected) and forced induction (turbocharged/supercharged) vehicle. The Stage 3 creates a 2D injection map based off boost and fuel injector pulse width to deliver the most accurate and tunable water-meth delivery on the market. Taking it one step further the Stage 3 will control 2 Hyper-Sonic Nozzles independently of one another to solidly the exact amount of water-methanol is provided at all rpm ranges of the engine. ... [Read More]

    • ASIN: B0184JV4SU
    • UPC: 012904001144
    • ASIN: B0184JV4SU
    • Brand: Snow Performance
    • Manufacturer: Snow Performance

  • AEM (30-3301) V2 5-Gallon Water/Methanol Injection Kit with HD Controller and Internal MAP Sensor

    Water/Methanol injection (WMI) systems reduce air inlet temperatures and enhance combustion efficiency on turbo Diesel applications, which allows an engine to deliver more power with less effort. Water/methanol injection also offers a host of benefits that promote engine longevity, including the reduction of carbon deposits left by a Diesel's exhaust gas recirculation (EGR) system. AEM's Water/Methanol Injection Systems for turbo Diesel trucks and SUVs utilize the most robust hardware combined with more advanced features than any other comparably priced water/methanol injection system. AEM's o... [Read More]

    • ASIN: B00GSIB55W
    • UPC: 840879022624
    • ASIN: B00GSIB55W
    • Brand: AEM
    • Manufacturer: AEM

  • AEM 30-3350 AEM30-3350

    Water/methanol injection for gas engines is a proven means for effectively reducing engine inlet air temperatures and suppressing harmful detonation on forced induction and high performance naturally aspirated race engines. This allows enthusiasts to reliably increase boost and advance ignition timing-without using high-octane racing fuel-for power gains of up to 20percent. AEM's Water/Methanol Injection Systems utilize the most robust hardware combined with more advanced features than any other comparably priced water/methanol system. The on-demand progressive Multi-Input controller in AEM's ... [Read More]

    • ASIN: B00GSBRUP8
    • UPC: 840879022617
    • ASIN: B00GSBRUP8
    • Brand: AEM
    • Manufacturer: AEM

  • Snow Performance 540 Water/Methanol Injection Kit (Diesel MPG-MAX Universal)

    Snow Performance 540 Diesel MPG-MAX Universal Boost Cooler The only system proven to increase fuel economy in all load states empty or while towing. The MPG-MAX utilizes Boost/EGTs to create a sophisticated 2D Map to command injection. Complete with dual stage injection management, the microprocessor introduces a independently mapped second stage of injection (Power Nozzle).This dual stage injection results in the most accurate injection curve and lowest EGT temps, highest HP increases, and highest fuel economy increase of any water-methanol system. The net effect is smooth power in all engine... [Read More]

    • ASIN: B0184JUZ4Y
    • ASIN: B0184JUZ4Y
    • Brand: Snow Performance
    • Manufacturer: Snow Performance

  • AEM (30-3305) V2 Multi-Input Water/Methanol Injection Standard Controller Kit

    AEM's Multi-Input water/methanol injection controller features a multiple input design that enables users to install it on both high compression naturally aspirated vehicles (NA) via the MAF/IDC settings and ultra-high boost vehicles (above 35 PSI) using an external MAP sensor. The Multi-Input controller works with an external 0-5 volt voltage-based external MAP sensor, a frequency based input for Injector Duty Cycle (IDC), frequency-based mass airflow (MAF), or a 0-5 voltage-based MAF. The controller design features large, turn-resistant knobs and larger numbering to easily set accurate start... [Read More]

    • ASIN: B00GSIBC4G
    • UPC: 840879022693
    • ASIN: B00GSIBC4G
    • Brand: AEM
    • Manufacturer: AEM

  • AEM (30-3306) V2 Water/Methanol Injection HD Controller Kit with Internal MAP Sensor

    AEM's Boost Dependent HD turbo Diesel Controller has an on-board MAP sensor (up to 40 PSI) with a molded-in nipple for a boost hose pickup. The controller design features large, turn-resistant knobs and larger numbering to easily set accurate start and full activation points, with covered status LED and test buttons for added splash resistance. A plug is integrated into the controller housing for mating to the redesigned wiring harness's positive-lock connector. The Boost Dependent controller housing includes a wiring legend on the back, easy to access integrated fuse and molded mounting tabs.... [Read More]

    • ASIN: B00GSIBDJK
    • UPC: 840879022709
    • ASIN: B00GSIBDJK
    • Brand: AEM
    • Manufacturer: AEM

  • AEM (30-3300) V2 1-Gallon Water/Methanol Injection Kit with Internal MAP Sensor

    Water/Methanol injection for gas engines is a proven means for effectively reducing engine inlet air temperatures and suppressing harmful detonation on forced induction and high performance naturally aspirated race engines. This allows racers to reliably increase boost and advance ignition timing-without using high-octane racing fuel-for power gains of up to 20 percent. AEM's Water/Methanol Injection Systems utilize the most robust hardware combined with more advanced features than any other comparably priced water/methanol system. The on-demand progressive controller in AEM's Boost Dependent ... [Read More]

    • ASIN: B00GSBKNF2
    • UPC: 840879022600
    • ASIN: B00GSBKNF2
    • Brand: AEM
    • Manufacturer: AEM

  • Stage 1 Boost CoolerTM Forced Induction Water-Methanol Injection Kit (Red High Temp Nylon Tubing, Quick-Connect Fittings)

    Innovative engineering, extensive field testing. Exceptional quality control. Provides longer brake life and performance. Easy installation, direct fit, perfect replacement. Offering the quality, reliability, and durability

    • ASIN: B079HV3297
    • UPC: 608067063084
    • ASIN: B079HV3297
    • Brand: Snow Performance
    • Manufacturer: Snow Performance

  • AEM (30-3320) V2 Water/Methanol Injection Tank Kit - 5 Gallon Capacity

    The AEM Water/Methanol 5 Gallon Tank can be used with nearly any water methanol kit using 1/4 inch OD hose for extended range or as an upgrade to competitor systems that supply tanks less than 5 gallons. The tank includes a high tech conductive low fluid level indicator with a positive lock connector and color matched wires to the wiring harness. Comprehensive hardware for mounting is included. Dimensions: 21 inch long x 8 inch wide x 10 inch tall with cap installed (9 inch tall without cap). All AEM Water/Methanol injection systems and components (pump, lines, fittings, filter, flow sensor, t... [Read More]

    • ASIN: B00GSIBBNS
    • UPC: 840879022716
    • ASIN: B00GSIBBNS
    • Brand: AEM
    • Manufacturer: AEM

  • AEM (30-3312) V2 Water/Methanol Injection Nozzle and Jet Kit

    AEM's Water/Methanol Nozzle and Jet Kit allows users who require additional water/methanol volume to match their engine's requirements by adding an additional injector. This kit includes one precision-machined billet injector with integral check valve to prevent unintended fluid flow, three billet injector nozzles to match water/methanol flow to an engine's horsepower output, one foot (12 inch) of 1/4 inch nylon injection tubing and a T-fitting to integrate the additional nozzle into an existing system.

    • ASIN: B00GSIBC3W
    • UPC: 106107228368
    • ASIN: B00GSIBC3W
    • Brand: AEM
    • Manufacturer: AEM

  • AEM 30-3003 Water/Methanol Injection Filter

    The AEM Water/Methanol Injection Filter is an in-line filter that uses a micronic mesh screen to filter particulates as small as 40 microns. This allows a cleaner flow of water/methanol to be passed into the engine, not only protecting the internals of the engine itself, but also the working parts of the water/methanol pump too. Run the AEM Water/Methanol Injection Filter in-line before the pump to protect both pump and engine. If you are using a Water/Methanol Injection System it may greatly increase pump life to use a water/methanol filter. The AEM Water/Methanol Injection Filter prevents fo... [Read More]

    • ASIN: B0032W3KH8
    • UPC: 840879020941
    • ASIN: B0032W3KH8
    • Brand: AEM
    • Manufacturer: AEM

  • Snow Performance 201 Stage 1 Boost Cooler Forced Induction Water-Methanol Injection Kit (Red High Temp Nylon Tubing, Quick-Connect Fittings) - 1yr Warranty

    Snow Performance 201 - 300 PSI UHO Pump, 3Qt Tank, Adjustable Boost Pressure Switch/Relay, 20 AMP Fuse/Fuse Holder, (20') Red High Temp Nylon Tubing, Boost Line/Required Hardware, Required Quick-Connect Fittings, SP Decal, Self Sealing Level Sensor, LED Alert System, Snow Performance Hypersonic-Water-Meth Nozzles/High Flow Check Valve. Race gas quality fuel on pump gas! Increase your pump gas octane by 25 points and make more power efficiently with a cooler running motor! The Snow Performance Stage 1 Boost Cooler water-methanol injection kit is available for all forced induction applications (... [Read More]

    • ASIN: B07GGQ4LLM
    • UPC: 692769344329
    • ASIN: B07GGQ4LLM
    • Brand: Snow
    • Manufacturer: Snow Performance

  • AEM 30-3015 Water/Methanol Injection Pump

    AEM's recirculation style pump offers improved performance, reliability and a much smoother, quieter operation when compared to older switched style pumps. With the use of a new internal bypass design, AEM's upgraded pump eliminates the erratic on and off switching/pulsing and ensures consistent fluid delivery for optimum performance. With durability and reliability in mind, AEM has designed the pump with a Santoprene diaphragm and EPDM seals to withstand the harshest of alcohol mixes.

    • ASIN: B005ASY2ME
    • UPC: 840879021412
    • ASIN: B005ASY2ME
    • Brand: AEM
    • Manufacturer: AEM

  • AEM Electronics 30-3301 V2 5 Gallon Diesel Water/Methanol Injection Kit

    Water/methanol injection (WMI) systems reduce air inlet temps and enhance combustion efficiency on turbo Diesel applications which allows an engine to deliver more power with less effort. Water/methanol injection also offers a host of benefits that promote engine longevity including the reduction of carbon deposits left by a Diesels exhaust gas recirculation (EGR) system. AEMs Water/Methanol Injection Systems for turbo Diesel trucks and SUVs utilize the most robust hardware combined with more advanced features than any other comparably priced water/methanol injection system.AEMs on-demand Boos... [Read More]

    • ASIN: B00MU184KU
    • UPC: 635595821282
    • ASIN: B00MU184KU
    • Brand: AEM Electronics
    • Manufacturer: AEM Electronics

  • AEM PERFORMANCE ELECTRONICS 30-3312 V2 WATER/METHANOL INJECTION NOZZLE & JET KIT, INCLUDES T FITTING, HOSE, 250CC, 5

    Aem (30-3312) V2 Water/Methanol Injection Nozzle And Jet

    • UPC: 134923011
    • Model: 30-3312
    • Color: Multicolor

  • Banks Power Water-Methanol Injection Tank Kit - 5 Gallon

    Banks Power Water-Methanol Injection Tank Kit - 5

    • UPC: 150862721
    • Model: 45145

  • AEM Electronics 30-3304 V2 Water/Methanol Injection Car Racing Controller Kit

    If you have a need for speed, give yourself a boost with the AEM Electronics 30-3304 V2 Water/Methanol Injection Kit. This injection kit delivers high-performance levels that help you get the most out of your

    • UPC: 199945783
    • Model: 30-3304
    • Color: Black

  • AEM (30-3305) V2 Multi-Input Water/Methanol Injection Standard Controller Kit

    The AEM Water Injection Kit is a safe and economical way to reduce air inlet temperatures to increase boost pressure for more power. Lower air inlet temperatures allow users to advance timing without having to

    • UPC: 113187993
    • Model: 30-3305
    • Color: White

  • AEM ELECTRON 303312 V2 Water-Methanol Injection Nozzle & Jet Kit

    AEM offers components to upgrade your existing water/methanol injection (WMI) system including inline water/methanol fluid filters, WMI flow gauges, the Water/Methanol Failsafe Device gauge, and water/methanol system nozzle and jet kits.Includes T Fitting, Hose, 250cc,

    • UPC: 41843596
    • Model: A1Y-303312
    • Color: Multicolor

  • Banks Power Water-Methanol Injection Nozzle Kit - 10

    Banks Power Water-Methanol Injection Nozzle Kit -

    • UPC: 131522284
    • Model: 45070
    • Color: Multicolor

  • Snow Performance S2B-210 Stage 2 Boost Cooler Forced Induction Progressive Water-Methanol Injection Kit

    Unlock 50-70+hp on your boosted vehicle while decreasing your air temps by up to 100 degrees. Increase your pump gas octane by 25 points and make more power efficiently with a cooler running motor. The

    • UPC: 526010247
    • Model: S2B-210
    • Color: Multicolor

  • AEM PERFORMANCE ELECTRONICS 30-3301 V2 WATER/METHANOL INJECTION KIT, HD CONTROLLER - INTERNAL MAP WITH 40PSI MAX

    AEM Universal Diesel Water Injection System P/N 30-3301. Water Injection System. Boost Reference Controlled. 5 gal Reservoir. Universal Diesel. Complete

    • UPC: 183050280
    • Model: 30-3301
    • Color: Multicolor

  • Stage 2 Boost Cooler Forced Induction Water-Methanol Injection Kit for 2005-2010 Ford Mustang Gt 4.6L

    It has combined performance, quality, and easy installation in this new water-methanol injection system engineered specifically for engine. Increase your pump gas octane by 25 point- SKU:

    • UPC: 915348272
    • Model: FU1094106
    • Color: Multicolor

  • AEM PERFORMANCE ELECTRONICS 30-3300 V2 WATER/METHANOL INJECTION KIT, STANDARD CONTROLLER

    Hot rod should refer to the look of your car, not the excessive heat of your engine. Get your engine inlet air temperatures to where they should be, racers, with the AEM Electronics V2 Water

    • UPC: 51558557
    • Model: 30-3300
    • Color: Black

  • Which Water-Methanol Injection Kit is Right For You?

    Watch this before running Methanol Injection

    AEM Water / Methanol Injection | HPA Product Spotlight