The DEI Versa-Shield was designed to protect starters from potential failure caused by under-hood heat soak conditions. Constructed using an aluminized heat reflective material backed with a hi-temp rated glass fiber insulation barrier, Versa-Shield is capable of reflecting radiant heat up to 2000 degrees Fahrenheit. Simply wrap the desired component with Versa-Shield and trim excess material. Edges attach to itself using a hook & loop edge closure design. In most cases there is no need to remove the component when installing Versa-Shield.
In today's high-heat environment, starters take in a lot of damaging heat that destroys the windings of the starter and solenoid. To combat this problem, Thermo-Tec created a non-conductive strap-on heat shield with a highly-reflective Mylar surface. The Starter Heat Shield will reflect over 90% of radiant heat, adding life to the starter and assuring reliable starts. The Starter Heat Shield is a universal kit that fits all starters and include SnapStrap fasteners for ease of installation.
The ONYX Series Starter Shield from DEI, provides reliable heat protection for starters under severe duty or extreme heat. Starters exposed to heat soak often malfunction or have problems starting reliably. DEI's next generation ONYX Series Starter Shield provides the highest level of thermal protection to prevent starter malfunction due to heat soak. The ONYX Series Starter Shield combines two technologically advanced textiles into a dual layer for maximum thermal control. The outer layer is made from heat treated glass fiber bonded with molten aluminum then formed into a tight weave for adde... [Read More]
Designed for severe duty use, the DEI Ultra 47 Starter Shield offers the highest level of protection. Constructed of two layers of material, a highly reflective outer layer combined with a high heat inner layer and able to withstand direct heat of up to 1350 degrees Fahrenheit, the Ultra 47 is the perfect choice for EXTREME high heat applications where engine heat soak is a problem. Measures 24 inches by 7 inches.
Starter heat shield wrap reflective mylar this shield is designed to prevent starter and solenoid failure from heat and Radiant.protection by reflecting 90% of the radiant heat up to 2000 degrees..The Starter Heat Shield is a universal kit that fits all starters. Perfect for both Motor Homes and Race Cars,Including 2 Stainless Steel Locking Tie Wraps 18 inches long
The DEI Heat Shroud is made from a high temperature rated glass fiber fabric with an aluminized outer facing. Same as Heat Sheath but with the added convenience of a hook & loop closure design along the open edges. Without the need of removing one end of connected wires, cables and hoses, simply wrap Heat Shroud around whatever needs protection and close the edges.
Dorman Products, Inc. is well-known as a leader in providing quality auto parts to the aftermarket. We've earned our reputation for excellence from over three decades of experience in providing automotive replacement parts, fasteners and service line products primarily for the automotive aftermarket. Our prestigious position stems from a unique combination of application expertise, innovative product design, and breadth of product offerings, many of which are not conveniently or economically available elsewhere. At Dorman, we take pride in the quality of our products and in your satisfaction.
The DEI High Temperature (HT) Silicone Coating provides lasting protection for any hot surface up to 1500 degrees Fahrenheit. DEI recommends the use of this coating with their exhaust wrap because it seals the material and provides lasting protection from oil, dirt and road grime. Don't limit the use to exhaust header wrap, this products works well on headers, blocks, starters, and even on your grill at home. HT Silicone Coating is VOC (Volatile Organic Compounds) compliant in all 50 states. Recommended for use with DEI non-Titanium exhaust wraps, HT Silicone Coating penetrates, seals and prot... [Read More]
Mr. Gasket Starter Motor Heat Shields are designed to prevent the starter from over heating. They are sandwhiched between aluminum plates to protect the starter. These shields are easy to use and are backed by a limited warranty.
Speed By Spectre, The 400mph company. Rooted in racing, we design and build every product with the same goal in mind; the best performance in the market... proven on the racetrack! All Speed By Spectre products are designed to perform as good as they look using high quality materials and engineered for optimum fit and function.
Heat-cooked starter motors and starter solenoids are a thing of the past, thanks to the Heatshield Products Lava Starter Shield. Specially engineered to protect these electric components that are mounted in the hottest part of the engine bay, Lava Starter Shield is made using Heatshield Products patented and proven crushed volcanic rock fiber. This is an ideal thermal barrier when there is less than 1-inch of airspace between the starter and heat sources such as headers, and also works great when there is more airspace. Lava Starter Shield has a cool, carbon-fiber appearance, and it does not c... [Read More]
(1)CNC shield v3 for Arduino It has 4 channel slots for DRV8825 stepper motor driver modules, 6 IO ports is sufficient to manage 3 stepper motors GRBL 0.8c compatible. 4-Axis support (X, Y, Z , A-Can duplicate X,Y,Z or do a full 4th axis with custom firmware using pins D12 and D13) 2 x End stops for each axis (6 in total) Spindle enable and direction Coolant enable Uses removable Pololu DRV8825 compatible stepper drivers. (A4988, DRV8825 and others) Jumpers to set the Micro-Stepping for the stepper drivers. (Some drivers like the DRV8825 can do up to 1/32 micro-stepping ) Compact design Steppe... [Read More]
Aluminum heat shields are a must for any Fits Chevy race engine. Prevents the heat of your exhaust from cooking the starter and solenoid. Easy to install.Cover fits Speedway starter motors # 91067440 and 91067439.
This Starter Heat Shield helps eliminate starter problems caused by close proximity of the exhaust to the starter. The radiant heat of the exhaust easily produces enough heat to destroy the windings of the starter and solenoid. To deflect this problem, use this heat barrier to reflect the radiant heat produced by the exhaust system. The unique construction of the aluminized material provides protection by reflecting up to 90% of the radiant heat.
High Starter Heat Shield Stainless Steel Construction Fits Chevy Small Block And Big Block The starter heat shield helps protect your starter from the intense heat of the engine compartment. This reproduction starter heat shield
Fits Chevy Small Block And Big Block High Starter Heat Shield Stainless Steel Construction NOTE: Use 33-182890-1 Retaining Nut Not factory original, but extremely effective in shielding starter from manifold heat. Manufactured in stainless steel,
New galvanized steel reproduction starter heat shield replaces recently discontinued GM replacement (GM #361443) exactly. Very close in appearance to factory original. Always choose , choose Rick's Camaro for superior restoration, and performance
© 10Toply.com - all rights reserved - Sitemap 10Toply.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com