StoneTech Salt Water Resistant Sealer is formulated to protect exterior surfaces exposed to de-icing salts from salt degradation. Always test in a small inconspicuous area with a 24-hour cure time to determine ease of application and desired results. Allow new grout installations to cure for a minimum of 72 hours prior to application. Make sure surface is clean, dry and free of waxes and coatings. Surface temperature should be between 35 ¡F and 90 ¡F (1.7 ¡C and 32.2 ¡C). Ensure that the area is well-ventilated during application. Up to 475 sq. ft. of coverage per gallon, depending on poro... [Read More]
A new high performance, nanotechnology driven, clear, breathable, deep penetrating, water-based, water and chloride repellent that provides exceptional penetrating power and water repellency. Siloxa-Tek 8500 is a deep penetrating water repellent that protects against water-soluble deleterious materials, and freeze/thaw cycles. With its long established hydrophobic agents, and through the latest advances in nanotechnology, its intelligent nano particles provide even deeper penetration adding an extra layer of protection. Once applied the change of the surface tension creates a surface environme... [Read More]
✅ULTRA DRY 70™ from Stella Sealants is a premium water-base, penetrating sealer, breathable, natural look. Designed to provide maximum stain protection. ✅USE ON: All natural stone (Limestone, Travertine, Marble, Granite, Quartz, Slate & Sandstone) Terra Cotta, stucco, pavers, concrete, veneer, tiles and grout. Recommended for Commercial and Residential interior and exterior surfaces including high-traffic areas such as kitchen, bathrooms, patios and driveways. ✅APPLICATION GUIDELINES: Stir well prior to use. Do not thin or dilute Do not apply to surfaces with temperatures of 35 C) Test... [Read More]
Protect, restore and extend the life of your project with micro-seal clear finish silane siloxane coating. Made from the best water repellent chemicals in the construction market, micro-seal is formulated by blending silanes and siloxanes that have long been trusted by architects, engineers and building owners around the globe. Micro-seal contains a proprietary ingredient called Micro-Lok that ensures a long lasting mechanical bond and creates a hydrophobic barrier that is not affected by weathering, salt, dirt, freezing temperatures, UV light and wind-driven rain, among many other damaging el... [Read More]
Concrete Sealer X-3 is a special blend of polysiloxanes which cross link below the surface of the concrete making the concrete surface water repellent and stain resistant allowing spills to be removed more easily. Concrete Sealer X-3 can be applied on all types of decorative and stained pavers, aggregate driveways and walkways, bricks, clay tiles, sandstone, limestone, marble, granite, slate and any natural stones.
The Armor SX5000 WB is a low VOC, water based Silane Siloxane sealer that is approved by the Department of Transportation in several states as a water repellent sealer. It penetrates deep into the surface where it chemically reacts to form a water repellent barrier within the pores, reducing surface water absorption by up to 95%. The Armor SX5000 WB will not change the look or color of the surface, and it will not leave behind a visible surface film. Surfaces sealed with the Armor SX5000 WB become more resistant to damage caused by water absorption such as cracking, spalling, pitting, freeze t... [Read More]
The Armor AX25 is a unique Siloxane infused high gloss acrylic that offers superior water repellency characteristics. With the Armor AX25 you get two products in one - a Siloxane water repellent sealer and a high gloss acrylic. The Armor AX25 is great for a variety of interior and exterior applications, but when applied around fresh or salt water pool, its abilities become apparent. The Armor AX25 will help to darken the surface of concrete, aggregate, and pavers to bring out any dull or faded coloring. The high gloss finish left behind is resistant to UV rays, fresh and salt water, surface gr... [Read More]
Rain Guard Water Sealers premium paver sealer is specifically formulated to work on all paver surfaces. A silane siloxane penetrating water repellent sealer can be used on vertical and horizontal. What makes paver sealer different from the rest is our proprietary ingredient called micro-lok. This additive ensures a long lasting mechanical bond and creates a hydrophobic barrier that is not affected by weathering, salt, dirt, freezing temperatures, UV light and wind-driven rain, among many other damaging elements. Easy clean up. Simply use soap and water directly after application is completed. ... [Read More]
Stain-Proof Original™ is an impregnating, invisible and breathable clear stone sealer that provides premium long term protection for natural stone, tiles, pavers, concrete, brick and grout from water and oil based stains and damage caused by water and dissolved salts. Treated indoor and outdoor surfaces become easier to clean and keep looking good for longer.Storage:Store this marble grout sealer locked up in a well-ventilated place. Keep container tightly closed and cool. Recycle wherever possible. Dispose of contents/container in accordance with local regulations.How to use:Test this stone... [Read More]
3M Marine Adhesive Sealant 5200 White. The adhesive sealant is extremely strong, retains its strength above or below water line. Stays flexible too - allows for structural movement. Has excellent resistance to weathering and salt water.
Rainguard Blok-lok Silane Siloxane Water Repellent Ready-to-Use is a 100% active, water based, low VOC, clear penetrating water repellent with a unique blend of silane/siloxanes and exclusive Micro-Lok formulation for use on vertical concrete, brick, block and other porous surfaces. Blok-lok forms a long-chain water repellent barrier deep within the surface. This hydrophobic barrier repels water and salts yet remains highly vapor permeable, allowing moisture to escape. Blok-lok provides excellent warrantied protection for a wide range of commercial, industrial, infrastructure, residential and ... [Read More]
Pond Shield is a non-toxic epoxy liner, made in the U.S.A designed for the pond and water feature industry. It is used to construct water features or ponds with a more designer, formal or natural look than rubber liners. Using Pond Shield epoxy means no more unsightly folds or creases. In addition, unlike rubber liners, there are eight Standard colors available - Black, Clear, Competition Blue, Sky Blue, White, Gray, Tan and Forest Green and Designer Accent Colors are available in three colors - Gold, Copper and Silver. Pond Shield is used for waterproofing structured surfaces found in water f... [Read More]
Black Diamond Stoneworks Durable Water Repellent is innovative, penetrating heavy duty hard surface sealer that will protect all hard surfaces from the damaging effects of water penetration, from wind-driven rain, saltwater, pool water with chemicals or anywhere you have water or moisture. Use on all hard surfaces including, concrete, grout, stucco, split-faced block, brick, pavers, man-made stone, natural stone etc. May darken some surfaces. Always Test in an inconspicuous location to confirm desired results before proceeding. Directions: Apply using a brush, roller or low-pressure pump spray... [Read More]
ProtectaClear is used to seal and protect many types of metal. It is tough and durable and will protect many types of metal from tarnish and oxidation. ProtectaClear is practically invisible when applied and if you make a mistake, it can be removed. ProtectaClear is used to protect jewelry, artwork and other plated or unpainted metals. Excellent protection and adhesion to even highly polished metals and stainless steel. ProtectaClear is shipped by US Mail so please make sure to use your mailing address.
Best Seller: Pool Sealers CategoryDeck-O-Shield Plus is formulated specifically to seal porous surfaces and is ideal to use on pool copings and decks protecting them from salt penetrationCoverage: Deck-O-Seal Plus will cover 300 – 475
"Best Seller: Pool Sealers CategoryDeck-O-Shield Plus is formulated specifically to seal porous surfaces and is ideal to use on pool copings and decks protecting them from salt penetrationCoverage: Deck-O-Seal Plus will cover 300 – 475
© 10Toply.com - all rights reserved - Sitemap 10Toply.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com