Best Tig Rod For Mild Steel - April 2024

Hot Max 24188 1/16-Inch ER70S-6 Mild Steel TIG Filler Rod, 1#

This is a 1/16-inch TIG filler. Designed for use with most types of mild steel. This product is both highly durable and highly fluid. Very resistant to corrosion.

• ASIN: B00N2TSW10
• UPC: 816002007387
• ASIN: B00N2TSW10
• Brand: Hot Max
• Size: 1#
• Manufacturer: Hot Max

Weldcote Metals ER70S-2 3/32" X 36" Tig Welding Rod 1 Lb.

Weldcote ER70S-2 is primarily for single-pass welding of killed, semi-killed, and rimmed steels, but may also be used for some multi pass applications. Because of added deoxidants, ER70S-2 can be used for welding steels that have a rusty or dirty surface, with a possible sacrifice of weld quality depending on the condition of surface. Typical specifications for these steels are ASTM A36, A285-C, A515-55 and A516-70. Package of 1

• ASIN: B005BCUIHM
• UPC: 877511006155
• ASIN: B005BCUIHM
• Brand: Weldcote Metals
• Manufacturer: Weldcote Metals

Weldcote Metals ER70S-2 1/16" X 36" Tig Welding Rod 1 Lb.

Weldcote ER70S-2 is primarily for single-pass welding of killed, semi-killed, and rimmed steels, but may also be used for some multi pass applications. Because of added deoxidants, ER70S-2 can be used for welding steels that have a rusty or dirty surface, with a possible sacrifice of weld quality depending on the condition of surface. Typical specifications for these steels are ASTM A36, A285-C, A515-55 and A516-70. Package of 1

• ASIN: B005BCU9NA
• UPC: 877511001860
• ASIN: B005BCU9NA
• Brand: Weldcote Metals
• Manufacturer: Weldcote Metals

INETIG COPPER FREE ER70S-6 3/32 x 36-Inch on 10-Pound Tube Tig Rod for Welding Carbon Manganese Steels

ER70S-6 Copper Free Tig Rod designed for welding carbon and carbon-manganese steels with tensile strength up to 510 MPa. Applications include tanks, boilers, steel structural works, earthworks and construction works. It is used in root pass and to support the welding when no back pass is possible. Excellent mechanical and toughness properties when in low temperature conditions.

• ASIN: B0089VZQ2O
• ASIN: B0089VZQ2O
• Brand: INE
• Manufacturer: INE USA

WeldingCity 5-Lb ER70S-6 Mild Steel TIG Welding Rods 1/16"x36"

Premium quality ER70S-6 mild steel alloy TIG welding rods 36" long with diameter 0.045", 1/16", 3/32" and 1/8". Specification: AWS A5.18/ASME SFA A5.18/ER70S-6; 36" (914mm) long rods with single end stamped. Features and Applications: for TIG gas-tungsten arc welding (GTAW) welding process. ER70S-6 is a general purpose welding wire for fabrication of mild steel which contains higher levels of manganese and silicon to produce high quality welds when used on dirty, oily, or rusty steel. The additional deoxidizers also provide better wetting, giving a flatter bead shape and the capability of fast... [Read More]

• ASIN: B00UES5IU0
• UPC: 799491551817
• ASIN: B00UES5IU0
• Brand: WeldingCity
• Size: 5-Lb 1/16"
• Manufacturer: WeldingCity.com

Harris E70S650 ER70S-6 Welding Wire, 3/32" x 36", 10 lb. Package

A general purpose welding wire for fabrication of mild steel. Contains more deoxidizers than ER70S-3.

• ASIN: B008BJEOMM
• UPC: 684032567337
• ASIN: B008BJEOMM
• Brand: Harris
• Size: 1 Pack
• Manufacturer: Harris Products Group

Blue Demon ERCu X 1/16" X 36" X 1LB Tube Deox Copper TIG welding rod

Eruct (Deoxidized Copper) is a filler metal containing 98% or more coppers with small amounts of phosphorus and silicon used for joining copper to itself or with galvanized or mild steel where high strength joints are not required.

• ASIN: B00I4BXLSU
• UPC: 652426972036
• ASIN: B00I4BXLSU
• Brand: Blue Demon
• Size: 1/16"
• Manufacturer: Blue Demon

2-Lb ER70S-6 1/16" 3/32" 1/8" premium carbon steel TIG welding rod (2-lb 1/16")

- Brand New and unpacked. - ER70S-6 1/16" 3/32" 1/8" X 36" TIG WELDING WIRE (2lbs)

• ASIN: B07BS32MNN
• UPC: 689733277233
• ASIN: B07BS32MNN
• Brand: HYW Products
• Size: 2-lb 1/16"
• Manufacturer: Not Available

ER70S-2 1/16" - 3/32" - 1/8" X 36" Tig Welding Wire rod 10 lb (1/16")

- Brand New and unpacked. - ER70S-2 1/16" - 3/32" - 1/8" X 36" TIG WELDING WIRE (10#) - We have other sizes and grades : 1/16", 3/32" & 1/8" (ER70S-6 & ER70S-2) - We offer large quantity discount and special freight policy.

• ASIN: B075M1ZP9G
• UPC: 600137573219
• ASIN: B075M1ZP9G
• Brand: HYWELD
• Size: 1/16"
• Manufacturer: HYWELD

WeldingCity 5-Lb ER70S-2 Mild Steel TIG Welding Rods 3/32"x36"

Premium quality ER70S-2 mild steel alloy TIG welding rods 36" long with diameter 0.045", 1/16", 3/32" and 1/8". Specification: AWS A5.18/ASME SFA A5.18/ER70S-2; 36" (914mm) long rods with single end stamped. Features and Applications: for TIG gas-tungsten arc welding (GTAW) welding process; ER70S-2 is a premium, multiple deoxidized wire which provides high quality and defect free weld deposits when properly used on most carbon steels. All position welding. Typical Applications: Repairs on a variety of mild and low alloy steel; Small diameter pipe and tubing; Sheet metal applications; Root pass... [Read More]

• ASIN: B00UES5H2O
• UPC: 799491551794
• ASIN: B00UES5H2O
• Brand: WeldingCity
• Size: 5-Lb 3/32"
• Manufacturer: WeldingCity.com

Blue Demon ER70S6 X .063 X 10LB Box Carbon Steel TIG rod

ER70S-6 is a mild steel welding wire that contains higher levels of manganese and silicon that other standard grades of MIG wire to produce high quality welds when used on dirty, oily, or rusty steel.

• ASIN: B00F42A0A4
• UPC: 652426702091
• ASIN: B00F42A0A4
• Brand: Blue Demon
• Size: 0.063
• Manufacturer: Blue Demon

Blue Demon ER70S2 X 3/32" X 36" X 1LB Tube Premium Carbon Steel Tig Welding Rod

ER70S2 is a premium MIG & TIG wire for welding on all grades of mild and carbon steels, producing quality welds with minimal porosity.

• ASIN: B00G4B5I1K
• UPC: 652426712373
• ASIN: B00G4B5I1K
• Brand: Blue Demon
• Size: 3/32"
• Manufacturer: Blue Demon

TIG Welding Tungsten Electrodes 2% Lanthanated 3/32" x 7" (Blue, WL20) 10-Pack

A welder's best friend, this ten pack of EWLa-2 blue 2% lanthanated 3/32" x 7" TIG welding tungsten electrodes will help you get the job done. Engineered to exact specifications, you can count on these long-lasting electrodes to perform during your most difficult welding application, time and time again. With reliable arc-striking and a low burn-off rate, these electrodes maintain the highest quality of arc while adhering to ANSI and AWS standards. Lanthanated electrodes are popular due to the relative ease of striking an arc and lower amperage required. They perform exceptionally well in both... [Read More]

• ASIN: B013KZ2BIA
• ASIN: B013KZ2BIA
• Brand: Midwest Tungsten Service
• Size: 3/32"
• Manufacturer: Midwest Tungsten Service

Hot Max 24188 1/16-Inch ER70S-6 Mild Steel TIG Filler Rod, 1# (Renewed)

• ASIN: B07TJ8PRYG
• UPC: 723548611025
• ASIN: B07TJ8PRYG
• Brand: Hot Max
• Size: 1#
• Manufacturer: Hot Max

Weldtool mild carbon steel ER70S-2 Size 3/32" 10# TiG welding rod

• ASIN: B079K6HGGX
• ASIN: B079K6HGGX
• Brand: Weldtool
• Size: 3/32"
• Manufacturer: Weldtool Technologies

ER70S-2 2-Lbs Mild Steel TIG Welding Filler Rod 3/32" x36" 2-Lbs

Welding Wire & Rod, Casters & Wheels, Rigging Supplies (Cable Wire Ropes) , Markers, Gloves and much

• UPC: 550950330

ER70S-2 - TIG Mild & Low Alloy Steel Rod - 39" x 1/16" (10 Lb)

ER70S-2 is a copper coated manganese-silicon wire for welding of mild steel and 490 N/mm2 grade steel. Adding on the slight aluminum(Al), titanium(Ti) and zirconium(Zr) metallic elements, the weldability is great on all-position pipe welding

• UPC: 340754525

ER70S-6 - TIG Mild & Low Alloy Steel Rod - 39" x 1/16" (10 Lb)

ER70S-6 is a carbon steel argon-arc welding rod. It has excellent plasticity, roughness and crack-resistance; especially in low temperature impact toughness is

• UPC: 959499970

ER70S-6 - TIG Mild & Low Alloy Steel Rod - 39" x 1/8" (10 Lb)

ER70S-6 is a carbon steel argon-arc welding rod. It has excellent plasticity, roughness and crack-resistance; especially in low temperature impact toughness is

• UPC: 555036245

ER70S-6 - TIG Mild & Low Alloy Steel Rod - 39" x 3/32" (10 Lb)

ER70S-6 is a carbon steel argon-arc welding rod. It has excellent plasticity, roughness and crack-resistance; especially in low temperature impact toughness is

• UPC: 215330065

ER70S-6 - TIG Mild & Low Alloy Steel Rod - 39" x 1/16" (1 Lb)

ER70S-6 is a carbon steel argon-arc welding rod. It has excellent plasticity, roughness and crack-resistance; especially in low temperature impact toughness is

• UPC: 781236551

ER70S-6 - TIG Mild & Low Alloy Steel Rod - 39" x 3/32" (2 Lb)

ER70S-6 is a carbon steel argon-arc welding rod. It has excellent plasticity, roughness and crack-resistance; especially in low temperature impact toughness is

• UPC: 121818307

ER70S-2 - TIG Mild & Low Alloy Steel Rod - 39" x 1/8" (1 Lb)

ER70S-2 is a copper coated manganese-silicon wire for welding of mild steel and 490 N/mm2 grade steel. Adding on the slight aluminum(Al), titanium(Ti) and zirconium(Zr) metallic elements, the weldability is great on all-position pipe welding

• UPC: 136294574
• Color: White

ER70S-2 - TIG Mild & Low Alloy Steel Rod - 39" x 1/16" (1 Lb)

ER70S-2 is a copper coated manganese-silicon wire for welding of mild steel and 490 N/mm2 grade steel. Adding on the slight aluminum(Al), titanium(Ti) and zirconium(Zr) metallic elements, the weldability is great on all-position pipe welding

• UPC: 335068841

ER70S-6 - TIG Mild & Low Alloy Steel Rod - 39" x 3/32" (1 LB)

ER70S-6 is a carbon steel argon-arc welding rod. It has excellent plasticity, roughness and crack-resistance; especially in low temperature impact toughness is

• UPC: 526643101