#1 Deck Premium Semi-Transparent Wood Stain is an advanced, water-based, semi-transparent stain formulation designed to penetrate deep into wood pores for maximum protection and longevity. #1 Deck protects wood from harmful UV rays and damage caused by water penetration. #1 Deck is safe to use, has a low odor, and is easy to clean up with soap and water. It is ideal for all soft wood types including pressure treated pine, cedar, fir, or redwood. #1 Deck Premium Wood Stain is intended for all soft wood types of weathered, exterior wood surfaces including decks, fences, siding, outdoor furniture... [Read More]
DEFY Extreme Wood Stain is a semi-transparent wood stain formulated using state-of-the-art nano-technology to create a level of durability that simply has not been available in a wood stain finish in the past. DEFY Extreme Wood Stain is our most innovative, high-performance product yet. Ultraviolet rays cause wood to turn gray and become susceptible to water penetration and decay. DEFY Extreme Wood Stain effectively protects the wood from the harmful effects of the sun and from graying by using zinc nano-technology. Extreme Wood Stain contains zinc oxide particles that reflect the damaging ult... [Read More]
DEFY Deck Stain for Hardwoods is a synthetic, semitransparent wood stain specially formulated for use on smooth cedar, mahogany, redwood, and other dense or difficult to penetrate woods. This V.O.C. compliant, water-based formula penetrates deep into wood fibers providing maximum long-term protection from weather damage and color retention superior to conventional stains. It was specifically designed with smaller resin particles to better penetrate wood, which helps to eliminate surface buildup and peeling. This product also works well on composite woods. DEFY Deck Stain for Hardwoods contains... [Read More]
Cabot Semi-Transparent Stains are deep penetrating, linseed oil-based stains that beautify and protect exterior wood. These lightly pigmented stains enhance the natural beauty of the wood by allowing the grain, texture, and color variations within the wood to show through. Acrylic 1300 series combines penetrating properties of oil-based with easy soap-and-water clean-up of water-based finishes. Will provide long-lasting, vapor-permeable protection that beautifies and enriches exterior wood surfaces. Formulated with non-fade, earth tone pigments to weather slowly over time.
SEAL-ONCE MARINE Premium Wood Sealer protects and stabilizes wood against water damage and decay. It uses proprietary nanotechnology to penetrate, coating the wood fibers at the cellular level. The advanced technology of MARINE allows it to form a superior barrier below the surface, protecting from the inside out.MARINE allows wood to age naturally without decay, and can be used to preserve old or new wood, extending its natural life. It is non-film forming and will not alter the natural beauty of the wood. It can be applied around or over open water, without harming marine life. MARINE preser... [Read More]
Restore-A-Deck Semi-Transparent Wood Stain is an advanced, water-based, semi-transparent stain formulation designed to penetrate deep into wood pores for maximum protection and longevity. Restore-A-Deck Semi-Transparent Wood Stain protects wood from harmful UV rays and damage caused by water penetration. Restore-A-Deck Semi-Transparent Wood Stain is safe to use, has a low odor, and is easy to clean up with soap and water. It is ideal for all wood types including pressure treated pine, cedar, fir, or redwood. Recent advancements in water-based wood stain technology have allowed the active ingre... [Read More]
Olympic ELITE Woodland Oils are super-pigmented ready-mix colors that use only transparent iron oxide pigments to deliver intense color and extreme clarity while building durability. An optimized blend of natural oils provides exceptional color that enriches wood grain. Recommended for use on any properly prepared exterior wood, including decks, fences, siding, railings, outdoor furniture and other wood surfaces. Apply to new, dry, pressure-treated wood, uncoated new or weathered wood, or previously coated wood with a weathered, clear sealant, or semi-transparent stain. COVERAGE: Approximately... [Read More]
A good exterior wood stain offers long-lasting protection, waterproofing and a mildew-resistant finish that maintains the integrity and beauty of wood in variable outdoor conditions. Our 100% Acrylic formula protects wood from rain, snow and sun damage. This stain is warrantied up to 3 years on decks and up to 5 years on fences and siding (see label for details). Use on properly prepared new to moderately weathered and unsealed exterior wood surfaces (0-10 years exposure) including decks, shingles, wood patio furniture, railings, siding, shakes and fences. This semi-transparent stain provides ... [Read More]
ECO Wood Treatment 100% Non-toxic wood treatment and preservative. Only one application is needed because it never comes off. It has even been proven to prevent the white rot fungi. No maintenance (one application only). Made from naturally occurring plant and mineral extracts, this wood preservative penetrates wood fibers to provide protection from sun and water. A single application results in a long-lasting, maintenance-free surface. Will not wear off, peel or fade; treated wood develops a beautiful patina. This plant- and mineral-based formula is based on a special family recipe and has be... [Read More]
Ongoing technical help and installation recommendations are available 8 AM to 4:30 PM Central USA. Prep the concrete surface thoroughly for the best, long-lasting results. It is important that the concrete is very clean with open pores. Read and follow surface prep instructions carefully since prep is vitally important to the success of WRC stain. WRC is non-acidic, so after application, there are no residues or chemicals to clean-up or neutralize. For Interior and Exterior use. A/B/C color chip represents multiple coats. Depending on dilution ratio, the application rate and the porosity of ... [Read More]
✔ Rainstorm ELEVATE ( Value 2 Pack ) by Concrete Coatings, is a concentrated water-based, dark gray organic pigment, concrete colorant ✔ Designed to be the fastest, most consistent stain, for use on concrete and cement-based surfaces. Environmentally friendly, no neutralization needed (like acid stain), ready to seal once it dries. ELEVATE Concrete Stain allows you to mix and match colors to create your own work of art.MIXING SHAKE the concentrated solution in the gallon container for 5 seconds. Fill container to the halfway mark, SHAKE for 10 seconds. Continue to fill the container wi... [Read More]
DEFY Marine Seal Wood Dock Stain is a long-lasting, semi-transparent dock stain specially formulated for use in the harsh marine environment. It is suitable for use on all types of wooden docking materials, providing extreme durability against the harmful effects of exposure to both fresh and salt water. Marine Seal has been specially formulated using state of the art nano-particle technology to provide superior resistance against ultraviolet color fade and mold and mildew growth.Let all wood weather 3-6 months prior to application. To achieve optimum results, Marine Seal should not be applied... [Read More]
SEAL-ONCE MARINE Premium Wood Sealer protects and stabilizes wood against water damage and decay. It uses proprietary nanotechnology to penetrate, coating the wood fibers at the cellular level. The advanced technology of MARINE allows it to form a superior barrier below the surface, protecting from the inside out.MARINE allows wood to age naturally without decay, and can be used to preserve old or new wood, extending its natural life. It is non-film forming and will not alter the natural beauty of the wood. It can be applied around or over open water, without harming marine life. MARINE preser... [Read More]
Restore-A-Deck Solid Color Wood Stain is an extremely durable synthetic-resin, opaque wood finish that helps protect against the damaging effects of water, fungi, and UV radiation on exterior wood surfaces. This V.O.C. compliant water-based product provides exceptional protection for nearly all exterior wood surfaces in a beautiful matte finish. Restore-A-Deck Wood stain can be applied the same day as the prep. Make sure that all standing and visible water has dried off the surface after prep. Typically 2-4 hours at 70º F and less than 50% humidity. Restore-A-Deck Solid Color Wood Stain can b... [Read More]
Exterior Wood Oil is to be used outdoor for basic treatment and maintenance of new and previously oiled wood surfaces such as decks, garden furniture, cladding etc. The special water-based composition of oil components ensures that the product is water-dilutable and friendly to the environment. The oil enhances the natural color and grain of wood. Exterior Wood Oil Natural is recommended to enhance the natural color structure of the wood. For rejuvenating of old wood surfaces, the pigmented oils are ideal as they recreate the original color of the wood. A change of color of the deck is also po... [Read More]
.onlineRetailerItemDescription {display: none;}QT, Neutral Base, VOC, Semi-Transparent Deck & Siding Stain, Lightly Pigmented Oil Stain For Increased UV Protection & Color.Qt, neutral base, voc, semi-transparent deck & siding stain, lightly pigmented oil stain for increased
WATER-BASED SEMI-TRANSPARENT STAINDeep-penetrating, richly pigmented100% acrylic resinEasy soap & water clean-upLong-lasting, vapor-permeable protectionUV protection & powerful mildewcide/algaecideWon't crack, blister or peelUse on new or reconditioned woodCoverage: 200-300 sq.ft. per gallon01-1306 1G WATER-BASED STAINSIZE:1 Gal.COLOR:Neutral BaseMust
© 10Toply.com - all rights reserved - Sitemap 10Toply.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com