Parameters: Chip Architecture: CM6642+QCC3008+NE5532+classic 47 PC-USB Input Sampling Frequency: 192K/24Bit THD: 0.01% PC-USB System supported: XP/W7/W8/W10/MAC/Linux Bluetooth VER: 5.0 Headphone matching impedance: 32-300Ω SNR: 103dB Headphone Max power output: 160mW 32Ω load Working voltage: DC12V Bass & Treble Range: ±6dB Product Dimension: 180*118*36mm RCA output level: 2.3V Product Weight: 0.47kg Frequency Range: 20Hz-20kHz(±3dB) Package Dimension: 240*210*60mm Packing List: 1*P1 Preamp 2*6J5 Tube 1*Power Supply 1*USB Cable 1*Bluetooth Antenna 1*Manual
Notice: Please turn on the amplifier for about 15 seconds before you connect the audio source and put on the headset. We recommend using 24~600Ω headphones, while armature earphones and headphones that have low resistance and high sensitivity are not suitable. As there will be tube Microphone effect, please keep the amplifier steady while using it. For noise issue, please keep it away from devices like routers, mobile phones or something that may interfere in the audio signal. If there are no interference, please remove all input and listen to see if the noise still exists. If so, the device ... [Read More]
Technical Parameters: Maximum output: 13W × 2 (8ohm) Input Impedance: 100Kohm Output Impedance: 4ohm 8ohm Signal to Noise Ratio: 89dB Input Sensitivity: 500--2000mV Total Hamonic Distortion: less than 1% (1KHz) Frequeney responses: 20Hz - 30KHz +/- 1dB Input Voltage:110V-120V、220V-240V/50-60Hz Tubes used: 2pcs FU50, 2pcs 6N8P, 1pc 5Z3P Size: 350mm (W) × 50mm (H) × 170mm (D) Weight:10Kg Power transformer 96 * 50 180w320v * 2 5v 3.15v * 2 12.6v (6.3v * 2) Output transformer 13w3.5k * 2 66 * 40
Note: Power cord is not included. Specifications: Tube: 6AD10 Power Output: 3.5W+3.5W @ 8 ohms Frequency Response: 30-40Khz (+-1db) Input Sensitivity: 500mV Signal-to-Noise Ratio: -80dB / 3.5W Residual Noise < 0.5mV AC Input AC Voltage: 100-250V AC Power Consumption: 38W Input Impedance: 10K ohms Output Impedance: 8/6/4 ohms (Japan Z11-EI48*24 Output Transformers) Dimensions: 160mm (w) x 134mm (d) x 125mm (h) Weight: 2.5kg Input: RCA Jacks Output: Banana Jacks AC: Standard IEC Jack with Fuse protection (2A Fuse) Package: 1PC Black tube amplifier
Specification: Output Power: 12W x 2 (Ultra-linear). Frequency response: 20Hz - 28KHz. Output Impedance: 4,8Ω. Total harmonic distortion: ≤ 1% (1kHz). SNR: 88dB. Voltage amplification: 6N2J × 2. Power output tube: Dawn export EL34 × 2. Rectifier tube: 5Z4PJ × 1. Input sensitivity: 750MV. Input impedance: 100KΩ (2 groups input) Dimensions (W × D × H): 310 × 268 × 165mm. Power Supply Voltage: AC 110V - 120V / 50Hz-60Hz (For United States) Features: Power Transformers: new imported 0.35, stack thickness 50MM (96-50). Output transformer core: new imported 0.35 (66x36(standard vers... [Read More]
Features:A wide range of combination and strong applicability.It can be combined with all audio signals available in the market, power amplifier and active speaker with analog and digital signal input, etc.It adopts the classic 6J1 design, optimized circuit, which produces soft, sweet and mellow sound.The product adopts the all-aluminum shell.Specifications:Type: PreampMaterial: Aluminium AlloyColor: Black, SilverPlug: USSignal-to-noise ratio: 98DBDistortion: 0.3%Treble adjustment range: ±6dbBass adjustment range: ±10dbFrequency response: 20hz-20khzSupply voltage: 12V,1ASize: 97.79 x117.83 x... [Read More]
Notice:Both 4Ω and 8Ω speakers can connect to the 8Ω and 0Ω posts of this amplifier. Specifications: Output power: 6.8W * 2 Frequency response: 20Hz-20KHz Input impedance: 100K ohms Output impedance: 4/8Ω SNR: 90db Input Sensitivity: 500mv-2000mv Harmonic distortion: 1% (1KHz) Tube: 5Z4P * 1 6H8C * 2 6P1 * 4 Operating voltage: 110V Weight: about 7 kg Size: 260mm * 215mm(including terminals and knobs 260mm) * 150mm (W*D*H) Package includes: Finished tube amplifier ×1 Power cable ×1
Product Parameters: Input impedance: 100K Ω (RCA) Output impedance :4 Ω and 8 Ω Output power: 10W (pure class A, 8 Ω load) Frequency response: 20Hz ~ 20KHz (-1db) Total harmonic distortion: 85dB (noise < 1.5mv) Operating voltage: AC230V or AC115V(switchable) Shape size: 335mm * 265mm * 165mm (length * width * height) Net weight: 15.5kg Gross weight: 18kg Packing List: 1 * 300B Single-ended Vacuum Tube Amplifier 1 * Power Supply Cable
Color:MC-13S Specification Output Power:40W + 40W (8ohm) Frequency Response:10Hz -- 60kHz (±2dB) Signal/Noise Ratio: ≥85dB (A) Load impedance: 8ohm or 4ohm Distortion:≤0.9%(28W) Maximum Power Consumption:220W Sensitivity:≤0.26V Tubes: 6CA7T x 4 12AX7B x 2 12AU7 x 2
Performance parameter: Bluetooth version: 2.1 + EDR Bluetooth distance: 10m Output power: 20W x 2 Frequency response: 20Hz - 20KHz SNR: less than 75dB FM frequency: 87.5 - 108MHz Input power: DC 9 - 14.4V/2A Remote controller battery: 3V CR2025 lithium metal battery (included) Package weight: 0.335 kg Package Size(L x W x H): 15.90 x 11.00 x 4.60 cm / 6.26 x 4.33 x 1.81 inches Package Contents: 1 x Amplifier
Description: High quality filter power supply. The four pins of rectifier respectively in parallel connect with decoupling capacitor, which can effectively eliminate the high frequency interference of AC power grid. Two 2200UF25V electrolytic capacitor filter the negative power supply, then stabilize voltage with 7815 and 7915 double DC power supply. Now the clutter interference of power grid is very small and the voltage is quite stable. So the item has better performance.The chip has high conversion rate and strong drive ability. The frequency band is wide and noise is very small. Specifi... [Read More]
Semoic,a legal trade mark, has been registered. Only those who are authorized are available to sell items under Semoic. Semoic will bring you joyful shopping experience. Color:transparentMaterial:glassSize:167*62*62mmPackage Contents:1 * Vacuum TubeOnly the above package content, other products are not included.Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Vacuum Tube design. Because you can't beat the warm sound of a classic valve amp. Great gift for guitarists, audiophiles or vintage hi fi fans. Graphic print design.
Parameters: Frequency response range: 0-100K-0.1dB Gold-plated input / output socket NE5532 OP chip (can be upgraded to better OP chips like BB or Muse) Original nichicon electrolytic capacitor TOP HiFi Original DALE resistors Precision rings resistance Battery: Lithium batteries, voltage: 12V, 1000mA Charging time: 2-2.5 hours to charging full the battery Working time: 4-4.5 hours Output power: 450mW SNR: 99dB Suggest load impedance: 16-400Ω Color: Black / Silver Size(L*W*D): 115 * 69 * 23 mm / 4.53 * 2.72 * 0.91 in (without knob) Trouble Shooting: Q: Right channel has static. Tried differe... [Read More]
Specifications: Power Supply: DC12V 1A Frequency Response: 20HZ -20KHZ((±3dB) SNR: 98DB THD: 0.1% Control:Potentiometer knob and toggle switch Treble adjustment range: ±6dB Bass adjustment range: ±10dB Audio Inputs/Audio Outputs: Gold-plated RCA Machine Size: 118.5*98*33mm(4.64 * 3.86 * 1.3 inch) Package: 1 x Tube Preamplifier 2 x 6K4 Tube 1 x Power Adapter
Specifications Color: Black Material: Aluminum Size: 95x100x32mm/3.7*4*1.3 inch Power: DC12V 1A Frequency Response: 20HZ (-0.2DB) ~ 20KHZ (-0.2DB) SNR: 100DB Input Sensitivity: 300 ~ 2000MV Output: 3000MV THD: 1000MV 0.1% Features J61 classic tube design,
SpecificationsColor: BlackMaterial: AluminumSize: 95x100x32mm/3.7*4*1.3 inchPower: DC12V 1AFrequency Response: 20HZ (-0.2DB) ~ 20KHZ (-0.2DB)SNR: 100DBInput Sensitivity: 300 ~ 2000MVOutput: 3000MVTHD: 1000MV 0.1%FeaturesJ61 classic tube design, optimization lineTube design can be replacedAluminum alloy shell, durable classicDC12V Power
FeaturesJ61 classic tube design, optimization lineTube design can be replacedAluminum alloy shell, durable classicDC12V Power supply, it is easy to find a suitable power sourceUnique boost mode, the high voltage power supply, power supplymode is
The Pyle Audio Amplifier PFA200 packs a punch so you can take your music listening to new levels. It can be used in your car or home. Despite its compact size, this 60W Class T
FeaturesJ61 classic tube design, optimization lineTube design can be replacedAluminum alloy shell, durable classicDC12V Power supply, it is easy to find a suitable power sourceUnique boost mode, the high voltage power supply, power supplymode is
If you have a radio, MP3 or other stereo system attached to your car or motorbike, get great sound on the move with this hi-fi amplifier which is also a great option for connection to
Description: This is a mature classic design,New optimization,Double side FR-4 1.6MM PCB Material,Each element from both acoustic and aesthetic point of view to consider,Whole board without jumpers,beautiful and practical! When users in the audio recording,the
Description: This is a mature classic design,New optimization,Double side FR-4 1.6MM PCB Material,Each element from both acoustic and aesthetic point of view to consider,Whole board without jumpers,beautiful and practical! When users in the audio recording,the
Description: This is a mature classic design,New optimization,Double side FR-4 1.6MM PCB Material,Each element from both acoustic and aesthetic point of view to consider,Whole board without jumpers,beautiful and practical! When users in the audio recording,the
Description: This is a mature classic design,New optimization,Double side FR-4 1.6MM PCB Material,Each element from both acoustic and aesthetic point of view to consider,Whole board without jumpers,beautiful and practical! When users in the audio recording,the
© 10Toply.com - all rights reserved - Sitemap 10Toply.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com